SevOne is used mainly for network monitoring. In my company, there are different services that include mobile data, voice, and broadband. SevOne is being used across all of these three services, and it also covers our corporate network.
SevOne is also being used for business reporting and capacity planning.
SevOne provides a comprehensive view of network performance data. It supports multi-vendors out of the box, which is very good. In 90% of the cases, new devices are plug-and-play, so when a new version comes out then SevOne has support for it out of the box. This is the case with either network monitoring or NetFlow data. In the worst-case scenario, they have an open framework that we can use as the next step. It helps us to get it up and monitored fairly quickly.
The ability to support multiple vendors' equipment is very important. In fact, it is one of our top priorities because this compatibility saves us time and money, as we are able to get new equipment set up quickly and without much effort. That's a key thing for us.
I'm not able to quantify our savings in terms of monetary value but in an ideal scenario, we save two weeks of time. When we add a device, we get data out of the monitoring points. Nine times out of ten, SevOne works immediately. In the exceptions, we reach out to the vendor to clarify what they need from an SNMP point of view. After that, we take it up with the SevOne certification team. With any new vendor that comes up, SevOne provides a 10-day SLA for the free certification. That's a pretty good saving.
It is very important to us that SevOne supports streaming telemetry-based networks. As with any other company, our network is evolving and we are moving towards telemetry. We are in a pre-discussion phase with SevOne to use the telemetric components so hopefully, in the near future, we will have it in our product suite.
We do have SDN but as of today, not with SevOne. That is something that we have aspirations for and will look to in the future.
The out-of-the-box reports and workflows help us to understand what is normal and what is abnormal in our network, and this helps to speed up time-to-value. This is one of SevOne's strong points as I compare them with other vendors that I have seen over the years.
SevOne gives us the ability to edit and customize the out-of-the-box reports and we do that quite a lot. We take what SevOne has provided and we change it to fit our needs. For example, when vendors change their versions and release, we fine-tune them to accommodate these things.
It is fairly easy to customize the out-of-the-box reports, although one needs to have a bit of knowledge to do that. I see it as any other product, but there are some limitations to it. There are complex structures from certain vendors such as Cisco that are not easily supported. For instance, Alcatel-Lucent provides multiple SNMP profiles but that cannot be supported in SevOne. This had to be accomplished using other means. It is cases such as this that highlight why you need to have the knowledge but once you have that, it's fairly straightforward.
Cisco is a vendor that we have had to customize reports for. With respect to temperature monitoring or CPU reporting, some of the out-of-the-box reports don't fit that specific vendor version, so we had to modify them to use the latest MIB and SNMP OID.
We use SevOne for high-frequency polling, where we can quickly flip it on and the network operations team is able to easily troubleshoot issues.
SevOne has enabled us to integrate our network performance management data across our ITSM and business decision-making tools. All of the data that we collect is also shared with other consumers, instead of just retaining it and reporting it. This is done via the Data Bus, which is running over the open-source product, Kafka.
This was fairly easy to deploy and then open using the various device groups and object groups. Once it is open, data can be sent to other consumers. There is no need to do a lot of work. You just quickly enable the component and open it.
These integrations are key to our organization, where there are a lot of users and a high need for the data. For instance, capacity planning. A bit of analytics outside of SevOne has also been implemented, taking the data from different areas including ITSM, network inventory, configuration management, et cetera.
This performance data is key, and having such integration means that we get value out of SevOne fairly quickly. We don't need to invest time and money developing in-house products or looking for other solutions. Of course, the SevOne database component comes with a cost, but it's directly related to what the business needs.
SevOne helps us to detect network performance issues in advance of them impacting end-users through proactive alerting. The monitoring system contains threshold policies that have been configured using the dynamic thresholding approach. Specifically, it looks at a few cases to develop a baseline and calculate the standard deviation. If there is any breach or any high utilization in the specific service of a network, SevOne will provide alerts according to the severity level. It will go to our ITSM and then out to the operational users who will keep an eye on it.