No more typing reviews! Try our Samantha, our new voice AI agent.

Everpure FlashArray X NVMe vs NetApp EF-Series All Flash Arrays comparison

Why PeerSpot?
Sponsored
 

Comparison Buyer's Guide

Executive SummaryUpdated on Mar 4, 2026

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Categories and Ranking

Everpure FlashArray
Sponsored
Ranking in All-Flash Storage
2nd
Average Rating
9.0
Reviews Sentiment
7.2
Number of Reviews
234
Ranking in other categories
No ranking in other categories
Everpure FlashArray X NVMe
Ranking in All-Flash Storage
17th
Average Rating
9.0
Reviews Sentiment
6.7
Number of Reviews
36
Ranking in other categories
NVMe All-Flash Storage Arrays (6th)
NetApp EF-Series All Flash ...
Ranking in All-Flash Storage
29th
Average Rating
8.6
Reviews Sentiment
7.5
Number of Reviews
39
Ranking in other categories
No ranking in other categories
 

Mindshare comparison

As of November 2026, in the All-Flash Storage category, the mindshare of Everpure FlashArray is 6.4%, down from 6.5% compared to the previous year. The mindshare of Everpure FlashArray X NVMe is 2.5%, up from 1.1% compared to the previous year. The mindshare of NetApp EF-Series All Flash Arrays is 1.5%, up from 0.7% compared to the previous year. It is calculated based on PeerSpot user engagement data.
All-Flash Storage Mindshare Distribution
ProductMindshare (%)
Everpure FlashArray6.4%
Everpure FlashArray X NVMe2.5%
NetApp EF-Series All Flash Arrays1.5%
Other89.6%
All-Flash Storage
 

Featured Reviews

Cristian Ion - PeerSpot reviewer
Senior Information Technology Engineer at Eta2u
All-flash storage has unified my clients’ workloads and has reduced TCO through efficient data services
The pricing and licensing of Everpure FlashArray is a problem because Everpure is considered more expensive than competitors. IBM, Lenovo, and Dell are more aggressive on prices. It is a very complicated market, especially now, and I understand the prices are higher at Everpure because of the software and all the enhancements it has. However, in this competitive market, we have a big problem selling to customers that are on a tight budget. A product with better pricing would be a win in the end. The RC or C20, for example, was a very good product that I could sell more easily than other options. Everpure FlashArray//C is sufficient for most workloads and virtualization workloads if you do not have very large databases. A product like that helps, and perhaps a new product in the future that is a little cheaper than the current options would be a possibility to gain more market share. I see the return on investment clearly from using Everpure FlashArray, but the challenge is selling it to customers for the first time. There are many customers who fall in the sweet spot where they are too small for an X or even a C model. They need something a little cheaper, they have the money for a cheaper version, and they need the performance of a Pure system. These customers could be more easily approached if Everpure offers a version of a local device in the future that is even cheaper than the C-class. I am trying now to help customers understand the concept behind AG1. I know that AG1 is not profitable if capacity is less than 50 terabytes. However, some customers would be very willing to pay for 25 terabytes in a cloud operated by Pure and to have it accessible with very good speed. We will see what the future brings.
Jaehoon Oh - PeerSpot reviewer
Chief Technology Officer at Lambda256
Supports efficient storage management through volume snapshots and offers reliable non-disruptive upgrades
I have no specific improvements to suggest for Pure FlashArray X NVMe at this time. The performance statistics could be enhanced. I can see the performance statistics in the Pure Storage console, but it does not show the performance by 4K byte unit. It displays IOPS and bandwidth, but IOPS is about real use, and I want to know how many IOPS are currently running in 4K byte units. I cannot see that IOPS because most storage systems report their performance by 4K byte unit. I want to see Pure Storage performance by 4K byte unit to compare with other storage or other internal NVMe SSD.
Tayo Olubanke - PeerSpot reviewer
Managing Director at GCET
Offers flexibility and top-notch technology
You can go to bed peacefully if you have a NetApp. If you have NetApp within your data center, you get to know about power failure if you are using it. Your NetApp will still come alive. Even if it does not come alive, I can say that it is not like other tools when it comes to dealing with power failure. The tool is affordable, and the technology is top-notch. It is the only technology that has software for what we call inline compression and deduplication. All the products under NetApp are aiming to use AI. I know that you can achieve whatever you want to do with NetApp EF-Series All Flash Arrays. I rate the tool a nine out of ten.

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Pros

"If you're interested in using this solution, I recommend that you do the same — see if you like it."
"It has improved my organization in the way that we have high reliability and faster access to our data."
"With Pure Storage FlashArray we have been able to deploy several thousand VDI servers, virtual machines, very quickly and efficiently."
"The product has not gone down in a year, so I would say that it is stable, and we haven't seen any high spikes in read/write latency."
"The all-flash disc is the most valuable feature of this solution."
"We like the speed. It's very low latency. In virtualization, you can mask lots of problems, and even in code you can mask lots of problems, with low latency. It's just pure speed and low latency."
"The best features of Pure Storage FlashArray are its ease of use and user-friendly interface, and the performance allows all types of services to be visualized from a single point of interface, making it more robust and user-friendly."
"All our junior partners can administer the storage arrays. It is simple and easy to use. We don't have to dedicate a whole team of full time people to work on it."
"The solution is very straightforward to set up."
"The duplication algorithm allows us to get a lot more use out of less storage. We're running a five terabyte array right now and we're running probably about 30 terabytes on it. So the duplication rate is pretty phenomenal, without a cost to performance. It still runs pretty smoothly."
"It has drastically improved the performance of our high-end Oracle databases and allows us the ability to replication to a DR location with ease."
"On a scale of one to ten, I rate Pure FlashArray as ten."
"The database workloads are pretty fast because I frequently move data from here to there."
"We're able to get higher-density workloads on the same infrastructure, and we have a smaller physical footprint. The performance is excellent – during our test the bottlenecks are never on the X array, it just keeps picking up the pace to match what you need. The real-time visibility is a differentiator in my opinion."
"It has good, reliable, and fast storage."
"The most valuable features of Pure FlashArray X NVMe are its superior performance compared to other flash tiers, as well as its ease of use, with an intuitive user interface that is simple to deploy and use."
"Our use case is both corporate storage and for all of our datacenter and back-end enterprise applications."
"When we compared it to other all-flash arrays, it was the most cost-effective solution and really the most performant that we looked at."
"It's still worth purchasing as the support is good and also the performance is very good."
"This storage solution is both stable and scalable, and it works for our needs."
"The replication and mirroring features are very good."
"The solution allows us to segregate one storage unit from another."
"At the end of the day, low latency was what geared us towards the EF."
"The stability, speed, and reliability are the solution's best features. The information is also very secure."
 

Cons

"We would like to see more development on their Copy Automation Tool (CAT) for Oracle, as well as better integration for our customers running Oracle VM."
"If there is one thing that I did not appreciate about Pure, it is that between the two different lines, which would be FlashBlade and Everpure FlashArray, there is no easy way to migrate LUNs as far as being able to replicate across those platforms."
"The system has dual controllers but does not have a high level of resiliency built-in."
"I think replication is one area that still needs improvement. Earlier, Pure Storage FlashArray only had IP-based replication. There was no API-based replication, but they have enhanced the feature now. However, they need to work on API replication for C-type of arrays."
"Enhanced documentation and beginner-friendly guidelines would benefit users with less configuration experience."
"One improvement area is the eradication time delay."
"The price of the Pure Storage Flash Array is too high and there needs to be more contract clarity."
"For scalability, I rate it a six out of ten. We reach a limit. We never reached this limit, however, the architecture allows you to go until a certain size, and after that, you have to buy another array."
"The tool's pricing is higher than competitors."
"One point I'd like to improve is that the tool should start selling small boxes again. It discontinued some products and is focusing on bigger, more capable boxes, neglecting the SMB market. Even though it's not a big market, it shouldn't have removed them."
"Every time I think of something that needs to improve, they're one step ahead, which I love. The only area I wish to see improve, I believe is coming, is in the FlashBlade product. Blade implementation fell short on a few of the services."
"We have run into a couple of instances recently where we are running out of space. So we have had to buy some more packs for it and they have deployed fine and it has increased smoothly."
"In the future, I would like to see integration with enterprise backup systems."
"Managing data isn't difficult for me. The performance is usually perfect, but we sometimes have capacity problems."
"The only area I wish to see improve, I believe is coming, is in the FlashBlade product."
"Right now, the box itself is just strictly working as a backend storage system. It would be fantastic if we could access it directly like a NAS device through network access or SIS drives. I think they have an interface, but I am not sure how good it is. If we could address a box directly on the network without having to go through a server, it would be great. The replication schemas could be improved. We are not using replication on the storage level right now. We use a different type of replication. If their replication would be as good as the one that we have, I would probably run the replication schema because it might be faster, but I don't know that for a fact. So, I cannot say that they have good replication. All I can say is that they need to inform us better."
"It says NetApp on the badge, but it’s not a NetApp product."
"Their problems are on the software and the controlling of the storage where they lack segmentation and federation."
"Here in Egypt, we do not have an official office or central point of support."
"A little more manageability, a simpler management interface. It's not necessarily that it's way overly complex. It's just that it's not as easy as the FAS series."
"Nonetheless, there are a couple of other things that NetApp hasn't done right."
"As far as the manageability, being able to port between the two and have to do less training in-house from a customer point of view, that would be the part to improve."
"They could improve overall scalability through performance. Denser capacity, which is doable, it is what the competition is doing."
"I would like to shrink it more, if we can. The smaller, the better."
 

Pricing and Cost Advice

"We feel that the pricing is fair and the licensing process was easy for both."
"Pricing is very competitive, and it's better than other competitors."
"There are no fees for licensing. The hardware is paid for only once."
"You can pay extra for Evergreen support, which gives you free upgrades when new features are introduced."
"We have a seen a reduction in TCO. It is definitely a cost-effective solution for us. We have seen ROI."
"I think that the pricing is less expensive compared to other standard products in the market today. Even the support contract and maintenance services cost less when compared to market-leading products like EMC."
"I'm good with the licensing. Of course, pricing can always be less... It's actually not a bad pricing model, considering I don't have to rip-and-replace."
"Once you purchase Pure Storage FlashArray it is all-inclusive, you receive all the licenses needed."
"The licensing is on a yearly basis."
"Its price could be better. It is not too expensive, but it is the high-end cost. It is kind of a Rolls-Royce. You pay a lot, but you get a lot out of it. So, the price pressure on the way down would be great, but at the end of the day, if you need to do the work, you just pay for it."
"The tool's pricing is cheap; I rate it a six to seven out of ten. Most of our sales are not subscription-based. We sell the hardware, and customers keep using it. They only renew the service part annually. The support can be a bit pricey, but the solution is more cost-effective than anything else out there."
"Pure FlashArray X NVMe’s pricing is cheaper than other products."
"Our licensing fees are $500,000+ USD."
"Given its price, Pure is not the first option."
"Pretty much everything that you need is licensed when you buy the product. Licensing to me is different than the maintenance cost, but they can bleed into one another. We buy the product, and we expect three years of support bundled into what we negotiate on our storage arrays. I would start to see maintenance costs going into the fourth year, but we're not there yet."
"With Pure Storage, we would like to continue seeing price reductions with flash storage. I don't think we're any different than anybody else when we continue to look to the industry for price reductions of both NVMe and traditional SSD storage. We would like to see these prices continue to decline and erode, even displacing large spinning disks."
"NetApp EF-Series All Flash Arrays is an expensive product."
"One has to opt for a perpetual-based licensing model for one year or three years. After three years, you need to renew the license."
"The pricing of this solution is competitive with other vendors here in Egypt."
"Cheaper pricing is always good. NetApp has been doing everything the right way. They've been figuring out things really well, going in the right direction."
"The pricing of the solution is expensive, considering the initial investment required...At the end of the product's life cycle, it could get cheaper, but the initial investment in NetApp makes it one of the most expensive solutions."
"Price-wise, NetApp EF-Series All Flash Arrays is costlier than Dell. You have to buy a lot of licenses separately."
"They need to improve its pricing. The storage market is dying. So, they need to improve the price because it should reach all people. NetApp is one of the top ones, and they are charging a little bit of royalty as compared to other storage solutions."
"The cost of our license is approximately $200,000 over three years for NetApp EF-Series All Flash Arrays. There can be additional costs for storage. For example, if you want to have eight terabytes."
report
Use our free recommendation engine to learn which All-Flash Storage solutions are best for your needs.
922,349 professionals have used our research since 2012.
 

Top Industries

By visitors reading reviews
Manufacturing Company
14%
Comms Service Provider
10%
Financial Services Firm
10%
Outsourcing Company
9%
Financial Services Firm
11%
Manufacturing Company
10%
Computer Software Company
9%
Government
6%
Construction Company
16%
Comms Service Provider
13%
Outsourcing Company
8%
Manufacturing Company
8%
 

Company Size

By reviewers
Large Enterprise
Midsize Enterprise
Small Business
By reviewers
Company SizeCount
Small Business75
Midsize Enterprise38
Large Enterprise162
By reviewers
Company SizeCount
Small Business14
Midsize Enterprise11
Large Enterprise13
By reviewers
Company SizeCount
Small Business12
Midsize Enterprise10
Large Enterprise18
 

Questions from the Community

Which should I choose: HPE 3PAR StoreServ or Hitachi Virtual Storage Platform F Series?
Both are great platforms, but if you are considering all flash solutions, I would recommend you to consider Pure Stor...
What is your experience regarding pricing and costs for Pure Storage FlashArray?
When comparing cost, I find that the cost is either the same or slightly higher, but that is returned by the ease of ...
What needs improvement with Pure Storage FlashArray?
The only thing I think could be improved is price. The price is the main concern for our customers.
What is your experience regarding pricing and costs for Pure FlashArray X NVMe?
The price of Pure FlashArray X NVMe is very expensive, though I do not know the actual price because I am using the E...
What needs improvement with Pure FlashArray X NVMe?
I have no specific improvements to suggest for Pure FlashArray X NVMe at this time. The performance statistics could ...
What is your primary use case for Pure FlashArray X NVMe?
My use case for using Pure FlashArray X NVMe is that my company is developing a blockchain platform for Ethereum or B...
Ask a question
Earn 20 points
 

Also Known As

Pure Storage FlashArray
Pure FlashArray//X NVMe, Pure FlashArray//X, FlashArray//X, Pure FlashArray X NVMe
NetApp EF540, NetApp EF-Series
 

Overview

 

Sample Customers

Nielsen, Lamar Advertising, LinkedIn, Betfair, UT-Dallas
Information Not Available
RP Data, Western Oregon University, Toei Animation
Find out what your peers are saying about Everpure FlashArray X NVMe vs. NetApp EF-Series All Flash Arrays and other solutions. Updated: November 2026.
922,349 professionals have used our research since 2012.