No more typing reviews! Try our Samantha, our new voice AI agent.

HPE Primera vs Pavilion HyperParallel Flash Array comparison

Why PeerSpot?
Sponsored
 

Comparison Buyer's Guide

Executive SummaryUpdated on Nov 8, 2026

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Categories and Ranking

Everpure FlashArray
Sponsored
Ranking in All-Flash Storage
2nd
Average Rating
9.0
Reviews Sentiment
7.2
Number of Reviews
234
Ranking in other categories
No ranking in other categories
HPE Primera
Ranking in All-Flash Storage
15th
Average Rating
8.2
Reviews Sentiment
5.6
Number of Reviews
42
Ranking in other categories
No ranking in other categories
Pavilion HyperParallel Flas...
Ranking in All-Flash Storage
34th
Average Rating
9.4
Number of Reviews
3
Ranking in other categories
NVMe All-Flash Storage Arrays (16th)
 

Mindshare comparison

As of November 2026, in the All-Flash Storage category, the mindshare of Everpure FlashArray is 6.4%, down from 6.5% compared to the previous year. The mindshare of HPE Primera is 1.5%, down from 3.5% compared to the previous year. The mindshare of Pavilion HyperParallel Flash Array is 0.8%, up from 0.2% compared to the previous year. It is calculated based on PeerSpot user engagement data.
All-Flash Storage Mindshare Distribution
ProductMindshare (%)
Everpure FlashArray6.4%
HPE Primera1.5%
Pavilion HyperParallel Flash Array0.8%
Other91.3%
All-Flash Storage
 

Featured Reviews

Cristian Ion - PeerSpot reviewer
Senior Information Technology Engineer at Eta2u
All-flash storage has unified my clients’ workloads and has reduced TCO through efficient data services
The pricing and licensing of Everpure FlashArray is a problem because Everpure is considered more expensive than competitors. IBM, Lenovo, and Dell are more aggressive on prices. It is a very complicated market, especially now, and I understand the prices are higher at Everpure because of the software and all the enhancements it has. However, in this competitive market, we have a big problem selling to customers that are on a tight budget. A product with better pricing would be a win in the end. The RC or C20, for example, was a very good product that I could sell more easily than other options. Everpure FlashArray//C is sufficient for most workloads and virtualization workloads if you do not have very large databases. A product like that helps, and perhaps a new product in the future that is a little cheaper than the current options would be a possibility to gain more market share. I see the return on investment clearly from using Everpure FlashArray, but the challenge is selling it to customers for the first time. There are many customers who fall in the sweet spot where they are too small for an X or even a C model. They need something a little cheaper, they have the money for a cheaper version, and they need the performance of a Pure system. These customers could be more easily approached if Everpure offers a version of a local device in the future that is even cheaper than the C-class. I am trying now to help customers understand the concept behind AG1. I know that AG1 is not profitable if capacity is less than 50 terabytes. However, some customers would be very willing to pay for 25 terabytes in a cloud operated by Pure and to have it accessible with very good speed. We will see what the future brings.
MR
Storage Architect at DXC Technology
Improved data compression has maximized storage capacity and simplifies daily operations
In terms of advantages, I don't see any improvements needed; however, when comparing HPE Primera with Hitachi and KvSP Harrison, it's not on the enterprise level, but we can go ahead with mid-level to enterprise cloud solutions. I don't have any specific ideas for additional features for HPE Primera in the next release; currently, all the features seem good, and I don't see any missing functionalities. I believe architecture could be scaled up to rate controllers, but I don't have any specific suggestions for improvements. Stability could be improved because maintenance-wise, issues with the controllers can sometimes be challenging; enhancements in high availability architecture could help.
it_user1534224 - PeerSpot reviewer
Manager of Production Systems at a media company with 10,001+ employees
Good support, improves performance, scales well, and boosts team efficiency
For us, in terms of what is very important, is keeping pace with the evolution of the new standards. For example, as PCI Express 4.0 becomes more ubiquitous, moving into PCI Express 5 is important. Having an architecture that can truly utilize 200-gig or maybe 400-gig networking, or having storage densities in line with what we would expect in a Gen 4, Gen 5 PCI Express, are things that as they come available, I hope that the vendor is looking at that going into the future. We need this because we're really at the point where our workloads are about to explode outwards. I would like to see the management layer improved. HyperOS 3.0 is excellent, and this is important because one of the things that we looked at in the beginning, before HyperOS 3.0 had been released, was that this is an excellent technology and it's very versatile, but it would be great if we could run certain things on this box. It would be helpful if there were more ways to consume the APIs or if there were some ways to get into the hardware, get into the functionality of the system programmatically, or have flexibility where, for example, we just need to do quick namespaces, or something similar. We don't want to deploy an entire secondary storage layer on top of this. Rather, we just want to run something quick. Having a containerized system or having some sort of first-party support for basic storage functionality, or basic extensibility would be excellent for us. In many ways, these boxes are very malleable. It's a blank slate, but having a little more in terms of, if you want more directed use of it, having some way to really get at that, would be helpful.

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Pros

"The amount of throughput that we're getting is really nice."
"After moving to Pure Storage, I have noticed that our databases are considerably faster and our performance has improved by at least four times."
"It is very easy to use."
"Pure Storage FlashArray has helped decrease the total cost of ownership because we know what the cost is going to be every year; we don't get any hidden fees or upgrade fees, everything is included in the price."
"It gives us capacity planning."
"All use cases for Everpure FlashArray are anything that requires a SAN should use it because it is the easiest thing on the market."
"We chose Pure Storage primarily because of its combination of performance and ease of use."
"We actually originally went with a competitor's product, and after about eight months, a lot of wrangling, had them buy it back from us, and then we bought a similar Pure Storage product, and it's just been great."
"Pure Storage is fancier, easier to use, and offers more features than HPE Primera."
"HPE Primera has good integration. All the users are using HP servers and some systems, such as Synergy, which integrate well into the solution."
"The greatest advantage is the support when we encounter incidents, as HPE's support is highly responsive."
"HPE Primera had helped us achieve very low latency performance, hence enhancing the customer experience of higher IOPS demanding applications."
"If you're using HPE, then I would recommend HPE Primera because its performance is very good."
"HPE Primera is stable."
"In terms of quality for block storage, it is one of the best on the planet, if not the best, in my view."
"The most valuable feature is the ability to provide the IOPS ratio which is required by a lot of our customers."
"In summary, this is an excellent system."
"There's lots of flexibility in how we use the resources while also maintaining a small footprint."
"This unit is so dense and the performance is so high that the advice I would give is that if performance is a critical factor for your use case, then you really ought to look at this unit."
"The high performance is very valuable, as well as the enterprise reliability features."
"We have been able to consolidate storage into Pavilion. Pavilions are our only SANs because it is a bring your own disk solution. When new drives come out, we are able to take out half of the drives in the system, put in new drives, move our VMs over to the new drives, take the other drives out, and populate those with new drives. Then, we are suddenly twice as dense as we were before. NVMe flash is only going to get denser and cheaper so we can make use of that every couple of years by just throwing newer disks into it at a fraction of the cost of a new SAN."
"Pavilion provides us with DAS performance and SAN manageability at an affordable price, which has allowed us to continue a very rapid growth of our business."
 

Cons

"As long as they always improve on IOPS speed, that's all we're really looking for. The faster the storage can be the more we can do speed of application and speed of use."
"Reports of performance and LUN utilization could be improved."
"The capability from Pure as far as sharing out files and things of that nature is a little bit lacking."
"CIFS and SMB Shares cannot be mounted directly."
"Pure Storage takes a hit in the minds and opinions of some of the customers because they cannot customize things as much as compared to a legacy storage provider's appliance such as NetApp, Dell EMC, or even HPE."
"I want to improve the overall service level of the solution."
"I would recommend improvements in the graphical user interface, specifically a detailed hardware view that would allow us to see the individual drives and individual controllers more easily, as currently, they are presenting only a higher-level view."
"The scalability of the solution is not as good as it probably could be."
"The solution could improve the reporting."
"Their support should be improved. Currently, it depends on who you get on the phone."
"The reporting console can be improved with out of the box reports."
"The product’s price needs improvement."
"HPE Primera's pricing model is an area of concern and can be considered for improvement."
"The file server embedded in Pure, the GUI, and the tracking and reporting features are better with Pure Storage."
"There are certain shortcomings in the technical support offered by HPE where improvements are required."
"There are certain features that require engineering-level access, which should be accessible to storage admins as well."
"In our current configuration, we can only run the line controllers in high availability, active-standby mode, whereas we would like to see active-active implemented."
"The rail system that Pavilion uses to mount up into a standard Dell or APC cabinet extends further back than normal rails, and they cover up the zero PDU slot. So, I don't like the rail system that comes with the device. That is my biggest complaint."
"I would like to see the management layer improved."
 

Pricing and Cost Advice

"We consume it as a service, and that's actually something we really like, or at least I really like from the technical perspective. That's because it means there is no hassle when we need to upgrade arrays to add capacity. We just interact directly with technical counterparts, and we say, "Hey, we're filling up," and they say, "All right, here's another data pack." They ship it in, and we install it. So, the as-a-service model has worked very well. Given the outstanding data reduction rates, it has improved our profitability because we're selling allocated volumes as part of the cloud service or recovering those costs from our tenants. It is very efficient, but that has offset the premium price. It started out that way, but over time, as we've added capacity, the price per gig has gone down a lot because we have a lot of it."
"The solution is expensive."
"The cost was initially high, but once more people were using it, the costs came down. This was because the University was reselling it to other departments."
"We implemented Pure Storage FlashArray nine years ago when it was new to the market and obtained it at a preferential price."
"The cost has room for improvement."
"Pure has been flexible with us on the pricing models."
"Pure Storage is expensive. It comes with features, so you get what you pay for. It is expensive compared to our old storage systems, but from the amount of human effort that you have to pay to babysit a storage system, it reduces that. I don't know if the TCO is reduced, but it's not a concern for us."
"We do not incur additional costs beyond the licensing fee."
"The price of HPE Primera could improve, it is expensive."
"HPE Primera is less expensive than HPE Alletra."
"From what I see, this is competitively-priced and HPE are doing their best to stay competitive."
"I rate the product price a seven on a scale of one to ten, where one is cheap, and ten is expensive."
"The solution’s pricing is affordable and worth the money."
"It is basically in the mid-range of the price. It is not cheaper than Hitachi, but it is cheaper than Pure Storage. There are no additional costs. Everything was taken care of in the price."
"The price to capacity ratio is good."
"The pricing for HDD was good."
"This is hardware. They have a singular array that you can populate with your own disk, or you can buy the disks through them. For controllers, you pay for the components inside of the SAN, but there is only one chassis that they work with."
"The licensing fees are very reasonable."
report
Use our free recommendation engine to learn which All-Flash Storage solutions are best for your needs.
922,528 professionals have used our research since 2012.
 

Top Industries

By visitors reading reviews
Manufacturing Company
14%
Comms Service Provider
10%
Financial Services Firm
10%
Outsourcing Company
9%
Outsourcing Company
11%
Computer Software Company
11%
Financial Services Firm
10%
Manufacturing Company
10%
No data available
 

Company Size

By reviewers
Large Enterprise
Midsize Enterprise
Small Business
By reviewers
Company SizeCount
Small Business75
Midsize Enterprise38
Large Enterprise162
By reviewers
Company SizeCount
Small Business19
Midsize Enterprise7
Large Enterprise17
No data available
 

Questions from the Community

Which should I choose: HPE 3PAR StoreServ or Hitachi Virtual Storage Platform F Series?
Both are great platforms, but if you are considering all flash solutions, I would recommend you to consider Pure Stor...
What is your experience regarding pricing and costs for Pure Storage FlashArray?
When comparing cost, I find that the cost is either the same or slightly higher, but that is returned by the ease of ...
What needs improvement with Pure Storage FlashArray?
The only thing I think could be improved is price. The price is the main concern for our customers.
Which would you choose - HPE Nimble Storage or HPE Primera?
HPE Nimble is a versatile synced WAN San solution. It is easy to use and doesn’t require much training for admins. Th...
What's the difference between HPE 3PAR StoreServ and HPE Primera?
HPE Primera has many great features but one of the best is that it is very easy to deploy. From an overall perspectiv...
What is your experience regarding pricing and costs for HPE Primera?
Regarding pricing, HPE Primera is moderate; it's neither cheap nor costly, but it's a reliable solution with ...
Ask a question
Earn 20 points
 

Also Known As

Pure Storage FlashArray
Primera
Pavilion HFA
 

Overview

 

Sample Customers

Nielsen, Lamar Advertising, LinkedIn, Betfair, UT-Dallas
Information Not Available
Texas Advanced Computing Center (TACC), Statistics Netherlands (CBS)
Find out what your peers are saying about HPE Primera vs. Pavilion HyperParallel Flash Array and other solutions. Updated: November 2026.
922,528 professionals have used our research since 2012.