No more typing reviews! Try our Samantha, our new voice AI agent.

Everpure FlashArray vs NetApp EF-Series All Flash Arrays comparison

Why PeerSpot?
 

Comparison Buyer's Guide

Executive SummaryUpdated on Jun 3, 2026

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Categories and Ranking

Everpure FlashArray
Ranking in All-Flash Storage
2nd
Average Rating
9.0
Reviews Sentiment
7.2
Number of Reviews
234
Ranking in other categories
No ranking in other categories
NetApp EF-Series All Flash ...
Ranking in All-Flash Storage
29th
Average Rating
8.6
Reviews Sentiment
7.5
Number of Reviews
39
Ranking in other categories
No ranking in other categories
 

Mindshare comparison

As of November 2026, in the All-Flash Storage category, the mindshare of Everpure FlashArray is 6.4%, down from 6.5% compared to the previous year. The mindshare of NetApp EF-Series All Flash Arrays is 1.5%, up from 0.7% compared to the previous year. It is calculated based on PeerSpot user engagement data.
All-Flash Storage Mindshare Distribution
ProductMindshare (%)
Everpure FlashArray6.4%
NetApp EF-Series All Flash Arrays1.5%
Other92.1%
All-Flash Storage
 

Featured Reviews

Cristian Ion - PeerSpot reviewer
Senior Information Technology Engineer at Eta2u
All-flash storage has unified my clients’ workloads and has reduced TCO through efficient data services
The pricing and licensing of Everpure FlashArray is a problem because Everpure is considered more expensive than competitors. IBM, Lenovo, and Dell are more aggressive on prices. It is a very complicated market, especially now, and I understand the prices are higher at Everpure because of the software and all the enhancements it has. However, in this competitive market, we have a big problem selling to customers that are on a tight budget. A product with better pricing would be a win in the end. The RC or C20, for example, was a very good product that I could sell more easily than other options. Everpure FlashArray//C is sufficient for most workloads and virtualization workloads if you do not have very large databases. A product like that helps, and perhaps a new product in the future that is a little cheaper than the current options would be a possibility to gain more market share. I see the return on investment clearly from using Everpure FlashArray, but the challenge is selling it to customers for the first time. There are many customers who fall in the sweet spot where they are too small for an X or even a C model. They need something a little cheaper, they have the money for a cheaper version, and they need the performance of a Pure system. These customers could be more easily approached if Everpure offers a version of a local device in the future that is even cheaper than the C-class. I am trying now to help customers understand the concept behind AG1. I know that AG1 is not profitable if capacity is less than 50 terabytes. However, some customers would be very willing to pay for 25 terabytes in a cloud operated by Pure and to have it accessible with very good speed. We will see what the future brings.
Tayo Olubanke - PeerSpot reviewer
Managing Director at GCET
Offers flexibility and top-notch technology
You can go to bed peacefully if you have a NetApp. If you have NetApp within your data center, you get to know about power failure if you are using it. Your NetApp will still come alive. Even if it does not come alive, I can say that it is not like other tools when it comes to dealing with power failure. The tool is affordable, and the technology is top-notch. It is the only technology that has software for what we call inline compression and deduplication. All the products under NetApp are aiming to use AI. I know that you can achieve whatever you want to do with NetApp EF-Series All Flash Arrays. I rate the tool a nine out of ten.

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Pros

"Access speed and power consumption are most valuable."
"The solution is stable with low vulnerabilities."
"While all these products have their own uses, Pure Storage FlashArray is in a market of its own."
"There was a dramatic improvement in operating costs just as a result of the environmentals and space, let alone the cost of the unit itself."
"For us, the most valuable feature is the compression and deduplication. Being able to deploy a three to one ratio for storage is absolutely critical in today's world with the growing need for storage and the growing need for more space."
"The solution has great efficiencies because it has scalability."
"Do it. I have zero reservations about recommending Pure to anyone who is looking for some really good all-flash."
"It has been very stable. I have not seen or heard of downtime storage issues after moving over to it."
"It provides multi-protocol, which is what gives the edge when it comes to big lineage PC workloads."
"Our use case is both corporate storage and for all of our datacenter and back-end enterprise applications."
"I would have to say performance at this point, because the application it is based on is so diverse."
"The management of it is very simple. that is the most valuable feature."
"The most valuable feature of this solution is the performance of the database access."
"Considering the cost, I find NetApp EF-Series All Flash Arrays to be the best storage available in the market."
"The main advantage of this solution is performance."
"Having the option of such high-speed storage in the data center is what makes it valuable."
 

Cons

"A noticeable area for improvement is the support for object storage. The FlashArray does not natively support object storage like S3 or Swift, which pushes customers needing these features towards the more expensive FlashBlade."
"The pricing needs to be improved as they offer very high budgeting prices. Searching is a big challenge in Pure Storage FlashArrays, especially when trying to restore a VM."
"The difference in pricing could become a problem for Pure because the commoditization of the solutions could lead to a different price being a problem."
"The only time that we had problems with it was that there was a bug in the VVol implementation but, outside of that, it has been flawless."
"It is way in excess of what we need. If anything, we could see a bit more speed. I'm just comparing it with what some of my colleagues who are implementing their own systems do."
"It would be beneficial to have a separate pricing point for environments with lower performance requirements or less workload."
"For scalability, I rate it a six out of ten. We reach a limit. We never reached this limit, however, the architecture allows you to go until a certain size, and after that, you have to buy another array."
"Pure Storage FlashArray has not helped to decrease the total cost of ownership, and I believe our total cost has probably gone up, but that's balanced by our increased amount of data and number of use cases."
"I've observed an issue when creating a new storage solution with NetApp EF-Series All Flash Arrays."
"Here in Egypt, we do not have an official office or central point of support."
"The dashboard could be simplified."
"Things like the FlexClones, SnapVault, SnapMirror, all of that. Some of it's available on the EF series, but we like what we have in the FAS system."
"The only major drawback is the replication between EF-Series units."
"I would like to shrink it more, if we can. The smaller, the better."
"The pricing could be cheaper and it should have documentation in more languages, specifically, Russian."
"When it's a software-related issue, it is difficult to find an engineer that can help you."
 

Pricing and Cost Advice

"The cost has room for improvement."
"The price of the solution is not expensive."
"The price of Pure Storage FlashArray could always improve. They are still more expensive than some alternative offerings. Cost is always a concern and when there is a battle they tend to be more expensive."
"I think that the pricing is less expensive compared to other standard products in the market today. Even the support contract and maintenance services cost less when compared to market-leading products like EMC."
"While more expensive than NetApp, Pure Storage FlashArray offers superior performance that often justifies the higher cost and adds value overall."
"Pure Storage has not helped to reduce our HANA licensing costs."
"We have seen a reduction in the TCO, because Pure Storage is partnering with Belfrics. This partnership reduces our latency and space."
"When we bought the unit, we bought per capacity. So, the licensing is per capacity, and the only thing that we have to buy every year or every three years is maintenance. Included in that maintenance is the upgrade of the controllers every three years at no cost to us."
"They need to improve its pricing. The storage market is dying. So, they need to improve the price because it should reach all people. NetApp is one of the top ones, and they are charging a little bit of royalty as compared to other storage solutions."
"The cost of our license is approximately $200,000 over three years for NetApp EF-Series All Flash Arrays. There can be additional costs for storage. For example, if you want to have eight terabytes."
"NetApp EF-Series All Flash Arrays is an expensive product."
"The pricing of the solution is expensive, considering the initial investment required...At the end of the product's life cycle, it could get cheaper, but the initial investment in NetApp makes it one of the most expensive solutions."
"Most of my customers pay for the license on a yearly basis. It can be expensive depending on the capacity number."
"Cheaper pricing is always good. NetApp has been doing everything the right way. They've been figuring out things really well, going in the right direction."
"Adding more capacity will increase the cost."
"Its cost-effectiveness is a major selling point. Compared to other storage vendors, the EF-Series offers excellent value for its price. It's truly a leading product in the industry."
report
Use our free recommendation engine to learn which All-Flash Storage solutions are best for your needs.
922,349 professionals have used our research since 2012.
 

Top Industries

By visitors reading reviews
Manufacturing Company
14%
Comms Service Provider
10%
Financial Services Firm
10%
Outsourcing Company
9%
Construction Company
16%
Comms Service Provider
13%
Outsourcing Company
8%
Manufacturing Company
8%
 

Company Size

By reviewers
Large Enterprise
Midsize Enterprise
Small Business
By reviewers
Company SizeCount
Small Business75
Midsize Enterprise38
Large Enterprise162
By reviewers
Company SizeCount
Small Business12
Midsize Enterprise10
Large Enterprise18
 

Questions from the Community

Which should I choose: HPE 3PAR StoreServ or Hitachi Virtual Storage Platform F Series?
Both are great platforms, but if you are considering all flash solutions, I would recommend you to consider Pure Storage. It may be more expensive, but it should pay for itself for its functionalit...
What is your experience regarding pricing and costs for Pure Storage FlashArray?
When comparing cost, I find that the cost is either the same or slightly higher, but that is returned by the ease of management, ease of use, and power consumption in the long run. I don't have...
What needs improvement with Pure Storage FlashArray?
The only thing I think could be improved is price. The price is the main concern for our customers.
Ask a question
Earn 20 points
 

Also Known As

Pure Storage FlashArray
NetApp EF540, NetApp EF-Series
 

Overview

 

Sample Customers

Nielsen, Lamar Advertising, LinkedIn, Betfair, UT-Dallas
RP Data, Western Oregon University, Toei Animation
Find out what your peers are saying about Everpure FlashArray vs. NetApp EF-Series All Flash Arrays and other solutions. Updated: November 2026.
922,349 professionals have used our research since 2012.