I have LinkRunner G2, and I use this product for testing and troubleshooting. I am able to test my network connections and cables and do general troubleshooting for network drops, network outlets, etc.
I do connectivity tests and cable verification, and I use it to do network link tests to check network drops and know whether it's alive or not alive, and if it is alive, which services are available. This tool does that quite well. It tells me if my link is alive, and not just that, if it is a switch, I get the model information of the switch and whether PoE is being delivered on the switch or the wire. I get the DNS server, and I get the IP address. It also checks if there is internet access on that line. If there's a VLAN, it gives me the VLAN number. It does quite a lot of tests in a very quick time. It saves me a lot of time. I don't have to run around and troubleshoot one thing after another.
It's very useful to me. Normally, I have to send a network specialist onto a site to do network tests because it requires a certain amount of expertise to log into a switch and check the services and VLAN information. Now, with this tool, I can send a technician who's already on site and already available, and that technician can simply plug this in and run the tests that are pre-configured on this device. The technician would have a lot of information to work with and know exactly where the problem is, what services are available, and whether the internet is there or not. If it's not there, the technician can give me the IP address that he or she is getting, and I can figure out what I need to do on my end without having to send a network specialist. This has saved me a lot of time. In the healthcare industry, in which work, time is of the essence. Hospitals need to be up and running, and I don't always have a network specialist available because it's a scarce resource, but I always have technicians. It allows me to respond quickly. It has reduced the time to troubleshoot a problem and resolve an issue. I no longer need to send a specialist out. Technicians can get the needed information without having to log into a switch or do any complex work that they are not familiar with.
It's an excellent testing tool for conducting network testing on copper and fiber, and what makes it excellent is the time it takes. It's a lot faster than other tools that I've used. It gives me a very reliable response, and it gives me various parameters for my test, such as the length of the cable, a wire map, etc. There is a colored screen, and it's very easy to read, which makes it very easy to work with. As opposed to some of the tools I've used that just give you a beep or two beeps, it gives me a lot more information which makes it easy to detect exactly where the problem is or how far along a line there may be a problem. That makes it very useful and an excellent tool to work with.
With Link-Live, as soon as I run a test, that test is uploaded to my account online. I don't have to save it, download it, or copy it. It doesn't get lost. So, I can go online and see all the tests that my technicians have run. I can have those tests assigned to a site, so remotely, I know what are the conditions of my sites, how reliable my networks are, and where improvements are needed. It stores all of my results, and those test results are online and available to me whenever I need them. It gives me a rich history, and it helps me to detect trends on my networks and where I need to do extra work. This historical reporting and being able to instantly access reports online is very helpful.
I use LinkRunner's AutoTest feature. It simplifies all the testing because just one click does it all. I hit that button, and it runs a series of tests in one go, without me having to interact with it. I just get my results, and I can get to the bottom of my testing. AutoTest gives me a bunch of results. It gives me very useful information. It tells me whether my link is alive; it tells me the speed I'm getting, whether it's a hundred megabits or one gigabit per second. For a switch, it tells me what port I'm on and what's the model of that switch. It tells me if I got an IP address. It tells me what my IP address is and which DNS server gave me that IP address. It tells me if I have internet service on that link, and if I'm doing PoE, it tells me if I have Power over Ethernet available on that link. It also tells me if there's a VLAN that I'm using and what's that VLAN number. There is a very rich test set that is produced by LinkRunner, and this information is very important to me in troubleshooting. Normally, I have to run a series of different tests to try to locate what the problem is. I have to run one test and then do another test, and another test. With LinkRunner, I can certify that the network connections I give to my clients have all the services they need. It also tells me how my network is configured. It helps me to provide reliable connectivity and also benchmark my network performance.
It's the fastest tool I've used. LinkRunner gives results in seconds, and it does that reliably. It gives me reliable results every time. Something that would normally take me an hour is done in less than a minute. That is very important for me because I'm in the healthcare industry, and time is very critical when I need to provide service to my healthcare professionals.
The technical capabilities of LinkRunner have allowed me to respond to problems a lot quicker. My resolution time has been reduced by 80% in some cases. Normally, I have to get a technician to go out, and on realizing there's a problem on the line, the technician would go to the help desk and report it and ask for a network specialist. I then have to get a network specialist, if he's available, and send him out to the site. He will then run a series of tests, log in to a switch, get to the switch room, and then do another test to find out what's the VLAN and if there's internet access. Now, I can have that technician who reported the problem just use LinkRunner to run one AutoTest, and that AutoTest tells my technician exactly what services are available and not available. If I need to do a fix, I have all the information I need to do that fix, and that could be done remotely because that technician can tell me what VLAN he's on, which switch he is connected to, and which port he is connected to without having to visit the switch room or comms room. In a nutshell, it has allowed me to reduce my ticket time by 80%.
It's very important that test results are automatically saved to NetAlly’s free Link-Live Cloud Service. I no longer have to rely on tests being saved by my technicians. Sometimes, test results are lost inadvertently, and then I have to revisit a site and retest. Being able to go online and get those results in real time and have them saved and compiled by LinkRunner's Link-Live service has been very valuable to me in building out my documentation for my sites. It has also been helpful in building out my documentation on trends on what has been my network performance. I can now look at my network performance and determine where I need to have improvements made. I can now save on my budgets, and I can now assign resources as I need to because LinkRunner gives me the ability to look at historical reports and have them all together in one piece in real-time.
The automatic uploading of test results saves me time. Normally, I have to wait until a test is done. Sometimes, the test is done on multiple floors of a building, and I have to wait till all those tests are done and my technician gets his or her computer, connects the device, and then uploads those test results to me. That could take hours. Now, with LinkRunner, with wireless connectivity, I can have those tests uploaded as soon as they are run. It means I can have the information I need almost immediately. I can now respond a lot quicker, which is very valuable to me.
It has made my network staff a lot more productive. My network staff spends less time troubleshooting little issues that could be fixed by a technician. My network staff has to work with fewer tools to fix a problem because LinkRunner does everything I need in one click. They no longer have to move up and down from a network drop up to a switch room, connect, and then go back down. They no longer have to work with a bunch of cables. They can just plug LinkRunner in and get the information needed, which is uploaded to Link-Live where I can view it, and my other technicians can view it. We can collaborate on results, and we can collaborate on ideas to fix a problem because that information is uploaded immediately and is available live to the entire team. It saves a lot of time, and it has improved my team's performance. They're very happy with it. In fact, I'm ordering more devices now because it saves a lot of time of my team from having to go back and forth. My site visits have decreased.
I've found the VLAN test feature to be most valuable. That's because not many devices do VLAN tests. Normally, I have to send a center technician to check a line and see if it's alive. If it's working, then I have to send a network technician out to log into a switch and see which port it's on and on which VLAN that port is. That's two persons and two separate visits. This device does all of this in a matter of seconds, and that has saved me a lot of time, troubleshooting, and resources.
Its ease of use is very impressive. LinkRunner allows me to have my technicians run tests that are normally too complex and require a network specialist. AutoTest works with just one click. AutoTest does a lot of testing that would normally require a network specialist to log in to a switch and check out VLAN based on a port. My technicians don't have to log in to the switch anymore. They can just do AutoTest and information is provided online. So, I no longer have to send a specialist. I can have my technician run these very complex tests. It saves me on resources, time, and site visits.
When it comes to troubleshooting, based on my experience, it has given very useful and very helpful information, especially for my field technicians. It has reduced my visits and the amount of presence because it gives a very comprehensive report on your network tests. It tests multiple variables and multiple parameters and gives a very informative report that makes it easy to pinpoint what is the root cause. There are many tools in this one solution. It's basically a bunch of toolkits or tool sets in one device, which makes it very powerful testing equipment.
One of the things I'd like to see in future versions of LinkRunner is a wireless dongle embedded into the product so that I don't need to have a separate wireless dongle. It should be built into that.
In the future, I'd also love to see a GPS module built into it so that I can have my results and my sites linked via a GPS location. I would then know exactly where my guys are deployed and link my test results to my GPS mappings. That'll be a great tool for me.
I've been using NetAlly LinkRunner G2 for just over two years.
In the two years that I've been using this, it has been very stable. I've used it at multiple sites, and I've used it with multiple users. They've not had any complaints about it. It has fallen a few times, inadvertently. It's a very stable device. It has proved to be rugged.
I work in the public sector. I work in a company with about 1,000 employees to 1,500 employees. I have about seven people using this solution, and they are technicians because they are now able to use this. It's so simple to use. I also have network specialists. I have a senior network specialist, and I have a network engineer.
We did contact NetAlly's technical support because we wanted to get a better understanding of the WiFi dongle and how it works. We didn't buy it the first time. We read about it afterward, and we thought it would add more value and capabilities. So, we contacted them to get an idea of how it works. They gave us a very good overview of how it works, and we went ahead and purchased it. I would rate their support a 10 out of 10.
The initial setup was straightforward. My team had this tool up and running in a matter of minutes. There weren't any challenges. We didn't have to call tech support, and it was very easy to get it going.
It was all done in-house. We got this device from the supplier, unboxed it, plugged it in, and checked the updates and made sure we were running the latest firmware. I created my account on Link-Live, and I was up and running in less than an hour.
It's reasonably priced in my market. It provides good value for money. The device is competitively priced as compared to other solutions. It gives you a lot of functionality and saves you a lot of time and resources. I see it as a good buy and good value for money. I stand for it.
I would rate this product a nine out of ten.