AirCheck G3 vs OneTouch AT Network Assistant comparison

AirCheck G3 and OneTouch AT Network Assistant are both solutions in the Network Troubleshooting category. AirCheck G3 is ranked #9, while OneTouch AT Network Assistant is ranked #13. AirCheck G3 holds a 9.1% mindshare in NT, compared to OneTouch AT Network Assistant’s 2.1% mindshare. Additionally, 100% of AirCheck G3 users are willing to recommend the solution, compared to 100% of OneTouch AT Network Assistant users who would recommend it.

AirCheck G3

Read 13 AirCheck G3 reviews

1,053 Views
800 Comparison Views

100% willing to recommend

OneTouch AT Network Assistant

Read 6 OneTouch AT Network Assistant reviews

227 Views
227 Comparison Views

100% willing to recommend

AirCheck G3

OneTouch AT Network Assistant

Comparison Buyer's Guide

Download the report

Executive SummaryUpdated on Jul 11, 2024

OneTouch AT Network Assistant and AirCheck G3 are both popular network diagnostic tools. While AirCheck G3 has more features, OneTouch AT Network Assistant is strong on pricing and support.

Features: OneTouch AT Network Assistant includes comprehensive network testing capabilities, detailed performance reports, and automation options. AirCheck G3 offers superior Wi-Fi analysis, faster diagnostics, and advanced wireless testing features.

Room for Improvement: OneTouch AT Network Assistant needs a more user-friendly interface, timely software updates, and intuitive dashboard designs. AirCheck G3 requires better battery life, compatibility with more add-on tools, and enhanced hardware durability.

Ease of Deployment and Customer Service: OneTouch AT Network Assistant is known for its straightforward setup and responsive customer support. AirCheck G3 is also easy to deploy but stands out due to its faster response times in customer service.

Pricing and ROI: OneTouch AT Network Assistant is cost-effective with good ROI, attracting budget-conscious buyers. AirCheck G3, though more expensive, justifies its higher cost through advanced features and provides better long-term value.

To learn more, read our detailed AirCheck G3 vs. OneTouch AT Network Assistant Report (Updated: September 2025).

Buyer's Guide

AirCheck G3 vs. OneTouch AT Network Assistant

September 2025

Download the complete report

Helped 867,676 peers since 2012

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Categories and Ranking

AirCheck G3

Ranking in Network Troubleshooting

9th

Average Rating

8.6

Number of Reviews

Ranking in other categories

No ranking in other categories

OneTouch AT Network Assistant

Ranking in Network Troubleshooting

13th

Average Rating

9.0

Number of Reviews

Ranking in other categories

No ranking in other categories

Mindshare comparison

As of September 2025, in the Network Troubleshooting category, the mindshare of AirCheck G3 is 9.1%, up from 7.9% compared to the previous year. The mindshare of OneTouch AT Network Assistant is 2.1%, down from 3.4% compared to the previous year. It is calculated based on PeerSpot user engagement data.

Network Troubleshooting Market Share Distribution
Product	Market Share (%)
AirCheck G3	9.1%
OneTouch AT Network Assistant	2.1%
Other	88.8%

Network Troubleshooting

Featured Reviews

David-Prusynski

Senior Network Engineer at a healthcare company with 5,001-10,000 employees

A portable, rugged device that reduces resolution time and saves thousands of dollars

It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you can eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address. That'd be a nice function. We should be able to put an AP to MAC address in Excel and export it as a CSV file and then import it. That'd be nice to have because I have that information for all my hospitals. The one I'm doing this weekend has got 550 access points. It is much easier for me to look at an AP name than to get a MAC address. Currently, I have to go to a different spreadsheet and try to find that MAC address. If I had the AP name, it would be like, "Okay. Yep. See it. Done." They are doing spectrum analysis in G3, which I would love to have in G2. That's a nice tool to have, and from what I heard, that's the same price. I'd like to have that. The other function I would love to see is the ability to test fiber. I know the $10,000 version has the ability to test fiber, but I would love this lower-cost device to be able to test fiber.

Read full review

JamesStout

IT Director at JVS Consulting

It's a simple entry-level tool that's easy to set up, but it has some limitations on speed and IP targets

OneTouch is an entry-level testing tool that's coming to the end of its life, I believe, so it has limitations. For example, it can only test up to 1 gig of network speed. It would be helpful if they increased that to 10 gigs. It is also limited in the number of IP targets you can test. If you want to test how many hops or different sites, you should be able to hit a test button and say, "Right then, test these 20 IP addresses to see if I can reach them." It only does up to 10. Most of NetAlly's other devices, like the G2, can do unlimited addresses.

Read full review

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Pros

"The airCheck is the real-time spectrum analyzer to see clients that could be connecting to our network, not just rogue networks out there, but rogue clients and other interference in that particular spectrum."

"The information provided by the solution for resolving connectivity and performance problems is very thorough. The reporting functionality is extremely good as I can pass that information on with little input. The device will identify issues and problems, e.g., the diagnostic material. When you have Internet access, it sends the information to your email address, which is very useful."

"AirCheck made a lot of children and caregivers quite happy. While I might not have resolved everything, I have reduced the problems that we had every night. During the day, they would do visible checks and not always rely on the monitors, but every night, they had at least three or four of those alarms. I was able to reduce it to once or twice a week since those appliances are still limited in their wireless capability."

"I like the cloud functionality. That's very useful because somebody can go onsite, someone who is not really skilled, and I can see the test results from the office."

"AirCheck has a feature that lets you play a tone so you can track down a rogue AP based on the RF signal. That's a cool feature. It can also help you identify interference like microwave ovens or Bluetooth devices. I also like the ability to link it to your online account. It sends a report via email and saves it on the cloud."

"It is portable. It is rugged. It comes with a nice case. It has been dropped, but it doesn't break. I don't have a crack screen or anything like that. It has pretty good battery life."

"It has made our networking staff more productive. We spend less time because the device helps us by identifying the issue and providing a solution for the customer. Prior to not having this device, we would have to guess when an issue arose. Now, we don't have to guess. This can easily save us hours per call."

"I also like the remote session and the ability to log in to the device remotely. You can log in to the tester with your computer and can see the screen and operate the tester remotely. This is a very cool function, but it's very advanced."

More AirCheck G3 pros

"OneTouch is easy to set up. You just plug it in, enter your details, and off you go. It only takes a few minutes as long as you've got Link-Live access or network access."

Cons

"NetAlly has been behind the curve on visualization, Wi-Fi design, and heat maps for a little while now. They're perfectly aware of this deficiency, but what they offer is good enough for a lot of people. It's not suitable for larger shops, but it works in a pinch. The AirMapper and subsequent AirMagnet integration is an afterthought."

"It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you could eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address."

"We use these out in the field, and because they're not allowed on our network, we usually have to have the person take them home and provide backhaul to them. In other words, they are not allowed through our firewalls to dump the data. So, we have to have them go to a separate wired network to dump the data. There could be an option to put an LTE and have a phone engine in it so that you can buy a SIM card for it and have it use cellular to download the data. That is something that would be nice to have. That's a little kink in this system right now. Other than using the Ethernet port to download data, it'd be nice if we could use either LTE or some other way to get the data that was collected by AirCheck G2 to our Link-Live portal."

"A feature I would like to see is the ability to charge the device via a PoE outlet. Usually, I need to charge it at home. It would be good to leave the device plugged in and charging at a PoE source at the customer site after a quick look at the network when I have moved on to other tasks."

"I would love to have a button that pretends that you're an iPhone 5 or an Android Samsung, then tell me what you think the experience is. This is a very difficult thing to do because each of these things has different radios in them and behaves differently. Now, I can go into the user's office, and say, "The tool says everything's green. The WiFI infrastructure is fine, but their iPhone experience sucks." Is it a problem with their particular iPhone or is it a problem with any iPhone model? If I could have this solution emulate an iPhone model so I can walk into that room, and say, "My tools pretending to be your iPhone and it works fine. It must be your particular iPhone that we have a problem with." I found mobile phones in general have lousy radios and the coverage isn't strong enough, but it would be a nice feature."

"The solution doesn't have much functional information online."

"The biggest improvement would be an easier upload over wireless to Link-Live. Currently, the device has to be patched into the Ethernet. The wireless upload has been giving us some issues."

"We use .1x authentication, so I need to download the certificate onto the device. It would be nice to have this functionality through the cloud as well. Right now, you need to do it through the software by connecting your laptop physically to the AirCheck. This is one thing that is a bit slow."

More AirCheck G3 cons

"It is also limited in the number of IP targets you can test. If you want to test how many hops or different sites, you should be able to hit a test button and say, "Right then, test these 20 IP addresses to see if I can reach them." It only does up to 10. Most of NetAlly's other devices, like the G2, can do unlimited addresses."

Pricing and Cost Advice

"The upfront cost of the solution is around $4,000."

"Pricing is on par with the rest of the industry and the licensing is decent."

"I'd always love a lower price, but as compared to some of the other tools, it is fairly reasonable. I personally bought one. So, I must have thought the value was there because I'm spending my own hard cash on it, not just the company's. You can get support. I don't have support on my personal device. We did buy support for our company devices. It is reasonable. It is not super expensive or astronomical."

"Because I work in a big company, it is a no-brainer. If I were a consultant, I would still buy it, but it would be a huge investment. Overall, it's a good tool to have."

"The price is fairly expensive, if you are a single individual. For me, it's well worth the cost of the unit. Depending on the nature of the work that you're doing, the upfront costs can be expensive. Typically, what happens in an environment is a department might have one device as opposed to technicians having them individually."

"For a few thousand dollars, you save yourself a ton of time. It's a great deal."

"The product has a pretty good price."

"If you find a feature you need, you have to call them and add it, but you should be able to use the product. You spend money on and invested in multiple devices and can't even use half of the features. They should negotiate with large enterprises who buy large numbers of units to provide NetAlly support for all of them at a nominal fee."

More AirCheck G3 pricing and cost advice

Information not available

See which vendors are best for you

Use our free recommendation engine to learn which Network Troubleshooting solutions are best for your needs.

See recommendations

867,676 professionals have used our research since 2012.

Top Industries

By visitors reading reviews

Manufacturing Company

13%

Comms Service Provider

10%

Government

Computer Software Company

No data available

Company Size

By reviewers

Large Enterprise

Midsize Enterprise

Small Business

By reviewers
Company Size	Count
Small Business	1
Midsize Enterprise	2
Large Enterprise	11

No data available

Comparisons

AirMagnet Survey PRO vs AirCheck G3

Compared 21% of the time

NetAlly EtherScope nXG vs AirCheck G3

Compared 21% of the time

LinkRunner vs AirCheck G3

Compared 20% of the time

Broadcom Network Flow Analysis vs AirCheck G3

Compared 17% of the time

iTrinegy NE-ONE Professional vs AirCheck G3

Compared 14% of the time

More AirCheck G3 Competitors

No data available

Product Reports

Buyer's Guide

AirCheck G3

September 2025

Download AirCheck G3 product report

Buyer's Guide

OneTouch AT Network Assistant

August 2025

Download OneTouch AT Network Assistant product report

Also Known As

AirCheck G2, AirCheck

No data available

Overview

AirCheck G3 is the most cost-effective hardware-enabled site survey solution for Wi-Fi 6/6E networks. It provides network professionals of any skill level with complete and accurate information to survey and validate Wi-Fi deployments and changes, resolve connectivity and performance problems quickly, speed up closure of trouble tickets, and ensure your Wi-Fi network meets end users’ needs.

The new and improved battery life of 10 hours (3 - 4 hours charge) lasts you and your teams throughout the day.

AirCheck G3 Product Info

NetAlly

The OneTouch AT Network Assistant is an automated All-in-one network tester for Ethernet and Wi-Fi troubleshooting and performance validation. The OneTouch AT troubleshoots desktop SIP/SCCP based VoIP problems in real-time with inline call monitoring, logging, and scoring. The OneTouch AT can automatically discover Wi-Fi devices and key device properties, including new 802.11ac access point and clients.

NetAlly

Sample Customers

Information Not Available

Disney, Carnival Cruise Line, Solarity Credit Union, Del Monte Foods, Lung Bioengineering, Peterbilt Motors Company,Port Angeles School District, Philips Healthcare, Denver University

Buyer's Guide

AirCheck G3 vs. OneTouch AT Network Assistant

September 2025

Free Report: AirCheck G3 vs. OneTouch AT Network Assistant

Find out what your peers are saying about AirCheck G3 vs. OneTouch AT Network Assistant and other solutions. Updated: September 2025.

DOWNLOAD NOW

867,676 professionals have used our research since 2012.

See our AirCheck G3 vs. OneTouch AT Network Assistant report.

See our list of best Network Troubleshooting vendors.

We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.