What is our primary use case?
I primarily use AirCheck for wireless surveys or for tracking down a specific AP. I have used it personally for identifying rogue AP's. Very cool feature to prove to a wireless vendor, Grandstream, that they are running a rogue AP MAC from their unit.
How has it helped my organization?
AirCheck helps us diagnose WiFi problems with medical equipment. For instance, if we get a call about a mobile ultrasound unit with a weak WiFi signal, we can dispatch a tech to that facility who can use AirCheck to identify the nearest WiFi access point. We can filter AirCheck for that key and locate the nearest neighbor to determine when it should be picking up the WiFi.
We need to prove that we have a solid WiFi connection before we send the equipment to the vendor to check the unit. Usually, the vendor needs to upgrade the driver or set the roaming feature to a more aggressive mode on the unit.
One handheld device is better than carrying a cart with an AP and a laptop. It's handy to troubleshoot or perform a wireless survey with only one device. It does an excellent job.
It saves time! I've used AirCheck a handful of times, and it was useful, but It didn't point the finger at the actual issue. It did indeed help to identify the problem. Very useful tool to have in your arsenal.
What is most valuable?
AirCheck has a feature that lets you play a tone so you can track down a rogue AP based on the RF signal. That's a cool feature. It can also help you identify interference like microwave ovens or Bluetooth devices. I also like the ability to link it to your online account. It sends a report via email and saves it on the cloud.
The reporting is basic but useful. It lets you know that it was able to reach the DNS and get an IP address from the DHCP server. They did a cut-over and had to use the link for AirCheck. Every time they plugged it into the network, it would send the report. It's helpful when you need to locate a cable.
What needs improvement?
Since the product is still new to me, and I'm new to the company, I find it challenging to figure out. I'm trying it out at home, so I'm working in a smaller environment with only three access points. When I tested it out, I realized that when it's broadcasting an SSID, it also shows the BSSID, which is just another access point broadcasting a shared SSID.
It was hard to determine which AP was which because it only shows the MAC address. It'll also display the MAC address of the BSSID, so it looked like I had 12 APs in my house. If I have three access points and each is a dual-band with an SSID or BSSID for each radio, it comes out to about 12 APs.
That's one of the bugs fixed in the latest firmware update, but it's only available if you have a NetAlly support contract. I'm trying to push them to give us that firmware update because it is a bug that should be resolved whether you have NetAlly support. If they gave us the firmware updates, we could probably help NetAlly identify additional bugs and improve their product. It seems like it comes down to money because they want you to buy the NetAlly support.
For how long have I used the solution?
I started to use AirCheck G2 about six to eight months ago.
How are customer service and support?
I had a battery problem with the device. Once the battery meter dropped down to two bars, the unit would start rebooting. It was still under warranty, so I contacted NetAlly, and they shipped me a new battery. I let the product go until it ultimately died. They identified the issue pretty quickly after I told them what it was doing, and the new battery shipped fast.
Which solution did I use previously and why did I switch?
I haven't been in the division long enough to know. AirCheck was purchased about three months before I was hired. I don't know if it replaced anything other than maybe a laptop with AirMagnet or some other wireless survey software.
What's my experience with pricing, setup cost, and licensing?
To activate most of the features, you need a NetAlly support contract. When you buy this high-dollar product, you should have access to most of the features. I would think that the NetAlly support contract should cover support, hardware, and software.
If you find a feature you need, you have to call them and add it, but you should be able to use the product. You spend money on and invested in multiple devices and can't even use half of the features. They should negotiate with large enterprises who buy large numbers of units to provide NetAlly support for all of them at a nominal fee.
What other advice do I have?
I rate AirCheck G2 seven out of ten. If you need to use its full capabilities, you should get a NetAlly support contract or wait until the company provides firmware updates without one.