Qlik Replicate vs Toad Data Point comparison

Qlik and Quest Software are both solutions in the Data Integration category. Qlik is ranked #24 with an average rating of 8.0, while Quest Software is ranked #21 with an average rating of 8.8. Qlik holds a 1.6% mindshare in DI, compared to Quest Software’s 0.8% mindshare. Additionally, 100% of Qlik users are willing to recommend the solution, compared to 100% of Quest Software users who would recommend it.

Qlik Replicate

Read 18 Qlik Replicate reviews

4,009 Views
2,927 Comparison Views

100% willing to recommend

Toad Data Point

Read 8 Toad Data Point reviews

1,484 Views
1,024 Comparison Views

100% willing to recommend

Qlik Replicate

Toad Data Point

Comparison Buyer's Guide

Download the report

Executive SummaryUpdated on Dec 19, 2024

Qlik Replicate and Toad Data Point compete in data integration and analytics. Qlik Replicate has an advantage in efficient data synchronization, while Toad Data Point provides robust analytics for complex analyses and reporting tasks.

Features: Qlik Replicate effectively replicates data with minimal latency across various platforms and supports a wide range of data sources. Toad Data Point offers strong data connectivity, performs detailed analytics, and excels in reporting.

Ease of Deployment and Customer Service: Qlik Replicate integrates seamlessly with existing infrastructure and offers responsive technical support. Toad Data Point simplifies deployment with extensive documentation and training resources, minimizing reliance on direct support.

Pricing and ROI: Qlik Replicate has a higher upfront cost but offers significant ROI through optimized replication capabilities. Toad Data Point provides a more economical investment with strong ROI from analytics features that enhance data operations.

To learn more, read our detailed Qlik Replicate vs. Toad Data Point Report (Updated: March 2026).

Buyer's Guide

Qlik Replicate vs. Toad Data Point

March 2026

Download the complete report

Helped 885,311 peers since 2012

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Categories and Ranking

Qlik Replicate

Ranking in Data Integration

24th

Average Rating

8.2

Reviews Sentiment

6.7

Number of Reviews

Ranking in other categories

No ranking in other categories

Toad Data Point

Ranking in Data Integration

21st

Average Rating

8.8

Reviews Sentiment

7.0

Number of Reviews

Ranking in other categories

Data Preparation Tools (3rd)

Mindshare comparison

As of March 2026, in the Data Integration category, the mindshare of Qlik Replicate is 1.6%, down from 3.0% compared to the previous year. The mindshare of Toad Data Point is 0.8%, up from 0.4% compared to the previous year. It is calculated based on PeerSpot user engagement data.

Data Integration Mindshare Distribution
Product	Mindshare (%)
Toad Data Point	0.8%
Qlik Replicate	1.6%
Other	97.6%

Data Integration

Featured Reviews

Shraddha Waghulde

Solution Architect at Predoole Analytics

Real-time data synchronization faces challenges with monitoring and affordability

The user-friendly interface in Qlik Replicate simplifies configuration and management of replication tasks because it is based on GUI, and users don't have to write any scripts. It is entirely drag and drop functionality. Even with zero knowledge of scripting, users can effectively use Qlik Replicate. The most valuable feature of Qlik Replicate is their change data capture feature. As soon as data is entered into the source, it gets captured at target locations. This occurs in near real-time, with replication happening within seconds at the target location. Additionally, whatever operations are performed at the source, whether adding data, deleting data, or updating anything, it gets replicated at target locations. It functions as data injection from source to target, ensuring all operations performed on the source system are replicated on target systems.

Read full review

Sudunagunta Bhavya Lekha

Junior Data Analyst at Lumendata

Drag-and-drop workflows have accelerated cross-database analysis and simplified daily reporting

I consider user interface modernization in Toad Data Point to be an area for improvement; it could be enhanced with a more modern, web-based look and smoother navigation, focusing on better UX and dashboard customization. Real-time collaboration could benefit from trying Git-style integration, which would strengthen team collaboration features. Performance with large data sets sometimes slows down our workflows, so implementing a better optimization engine specifically for big data workflows could enhance functionality, along with improvements in cloud-native deployment for better browser access. For the dashboarding feature, I believe Toad Data Point could improve by offering more interactive dashboards and advanced visualizations beyond the current basic charts and pivots. Implementing capabilities such as drill-down, interactive filters, and dynamic parameter selections would align more with BI-style interactivity. Visualizations compared to tools such as Microsoft Power BI or Tableau are quite limited, so enhancing this area with cloud-hosted interactive dashboards and seamless auto-refresh options would greatly improve user experience.

Read full review

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Pros

"A valuable feature of Qlik Replicate is that you do not need ETL; it's easy to use—you choose two systems and it automatically replicates them."

"The most useful functions of Qlik Replicate are the data manipulation to transformations."

"The main valuable feature is its real-time change data capture (CDC) capabilities, which process data with minimal latency. There is not much delay. It also performs well with batch-wise data applications."

"Low-priced reporting and analytics solution, with good scalability and stability. It has on-premises and cloud versions that are cohesive and can integrate well."

"From a technical perspective, this is an excellent product."

"The most valuable feature of Qlik Replicate is their change data capture feature."

"Support has been great."

"My advice to others looking into implementing Qlik Sense is that it's a great product."

More Qlik Replicate pros

"We had an unsupported version of Hyperion that needed to be replaced, and Toad Data Point allowed us to quickly transition to a similar solution and to easily convert all of our preexisting queries (more than 300) to the new solution with minimum effort."

"Toad Data Point plays a crucial role in data-driven decision-making processes by facilitating data access and retrieval operations, data analysis, validations, quality checks, and performance monitoring for scenarios such as slow running queries, high database loads, or system bottlenecks, which are valuable for troubleshooting and debugging."

"One of the greatest features is that you can get data from anywhere to anywhere with Toad Data Point."

"The best thing about it is its automation features."

"I have never experienced any issues with customer service."

"The Connectivity and Connection Manager supports a broad number of connection types, and it is trivial for end-users to set up their own connections to sources."

"I would estimate that Toad Data Point saves me about 30 to 70 percent of my time depending on the work type."

"We love it."

More Toad Data Point pros

Cons

"Some features on the graphical user interface are clunky."

"Support-wise, this solution is in need of improvement."

"It's not possible to replicate the QVC files in data analytics."

"The disadvantage is people are not going for this license because it is not marketed properly."

"This product could be improved by providing more insight regarding errors. We tried to debug it, but we could not trace the error message."

"It would be better if the solution’s pricing were more obvious."

"In various scenarios, an important consideration is when we encounter issues and Qlik Replicate suggests reloading a specific table. If we face any problems or encounter errors with that table, it becomes necessary to make a change in Qlik Replicate. Performing a full reload every time is not feasible or practical. Instead, we should identify the specific issues and address them without repeating the entire reloading process. Based on this approach, we can investigate and resolve the problem by performing targeted loads from the source itself. This change aligns with my perspective and is something I would like to implement."

"The product should improve its licensing limitation."

More Qlik Replicate cons

"I used their report writing a little bit, however, it could improve since it's not a really good report writer and it's a little clunky."

"The Mac license is incredibly expensive. It is 1,600 dollars each, which is more than the Windows version. Scalability is difficult when it is that costly."

"However, when accessing large data volumes and running complex queries like nested queries or stored procedures, Toad Data Point might get hung during those operations, which is the only significant challenge I encounter."

"Toad Data could improve by having additional features, such as query prediction. This could help someone who's not the strongest programmer. If the software could help them write queries correctly it would be very helpful, especially for small development teams or teams that lack the input skills necessary to write and program efficiently."

"On the scheduling server, some scheduled reports just sit there and never execute for the first time. After manually executing the first time, they run with no issues."

"I used their report writing a little bit, however, it could improve since it's not a really good report writer and it's a little clunky."

"Visualizations compared to tools such as Microsoft Power BI or Tableau are quite limited, so enhancing this area with cloud-hosted interactive dashboards and seamless auto-refresh options would greatly improve user experience."

"What could be improved is probably the user interface."

More Toad Data Point cons

Pricing and Cost Advice

"Qlik Replicate is mainly suited for large companies. However, it is too costly for small businesses. Its pricing is high."

"Qlik Replicate is not expensive, compared to GoldenGate."

"On a scale from one to ten, where one is cheap, and ten is expensive, I rate Qlik Replicate's pricing a nine out of ten."

"Unlike Azure, where you pay based on consumption, Qlik Replicate seems to charge per endpoint."

"Overall, Qlik is an expensive solution. You need to pay for all additional features that you would like to use."

"Pricing for this solution is very reasonable."

"The price of Toad Data Point was approximately $500 annually."

"The Mac licenses are expensive, costing 1,600 dollars each. This is much higher than for the Windows version. I maintain a very limited number of licenses due to this cost."

"The cost of this product is reasonable."

See which vendors are best for you

Use our free recommendation engine to learn which Data Integration solutions are best for your needs.

See recommendations

885,311 professionals have used our research since 2012.

Top Industries

By visitors reading reviews

Financial Services Firm

15%

Insurance Company

10%

Manufacturing Company

10%

Computer Software Company

Financial Services Firm

22%

Healthcare Company

10%

Manufacturing Company

Retailer

Company Size

By reviewers

Large Enterprise

Midsize Enterprise

Small Business

By reviewers
Company Size	Count
Small Business	9
Large Enterprise	11

No data available

Questions from the Community

What do you like most about Qlik Replicate?

The main valuable feature is its real-time change data capture (CDC) capabilities, which process data with minimal latency. There is not much delay. It also performs well with batch-wise data appli...

See all answers

What needs improvement with Qlik Replicate?

In terms of handling diverse data sources, Qlik Replicate does exhibit certain shortcomings.Other areas of Qlik Replicate that could be improved include its ability to serve as a single point tool,...

See all answers

What is your primary use case for Qlik Replicate?

My usual use cases for Qlik Replicate involve my previous organization and my current organization. I can provide my current experience. As an Australian energy provider, we have a lot of operation...

See all answers

What is your experience regarding pricing and costs for Toad Data Point?

The pricing for Toad Data Point is where it gets into trouble. Microsoft is free, so if you get SQL Server, you get all the other stuff with it. You have to use several Microsoft tools that don't a...

See all answers

What needs improvement with Toad Data Point?

See all answers

What is your primary use case for Toad Data Point?

We are working for US banking, and for that, we have a project where we are using PowerCenter along with ETL; in that, we are using Toad Data Point for the SQL queries. Drag-and-drop functionality ...

See all answers

Comparisons

AWS Database Migration Service vs Qlik Replicate

Compared 8% of the time

Oracle GoldenGate vs Qlik Replicate

Compared 7% of the time

SSIS vs Qlik Replicate

Compared 6% of the time

Qlik Compose vs Qlik Replicate

Compared 6% of the time

SAP Data Services vs Qlik Replicate

Compared 4% of the time

More Qlik Replicate Competitors

SAS Enterprise Guide vs Toad Data Point

Compared 10% of the time

WhereScape RED vs Toad Data Point

Compared 9% of the time

SAS Access vs Toad Data Point

Compared 9% of the time

SSIS vs Toad Data Point

Compared 8% of the time

Teradata vs Toad Data Point

Compared 8% of the time

More Toad Data Point Competitors

Product Reports

Buyer's Guide

Qlik Replicate

March 2026

Download Qlik Replicate product report

Buyer's Guide

Toad Data Point

March 2026

Download Toad Data Point product report

Also Known As

Replicate, Qlik Replicate

No data available

Overview

Qlik Replicate is a data replication solution for replicating data from one source database to another for business intelligence software. It offers data manipulation and transformations, replication without impacting source databases, and ease of use without needing ETL. The solution is stable and user-friendly, with detailed logging and support.

Qlik Replicate has improved the organization by allowing each team to replicate their data into a single-source data location. The most important feature of Qlik Replicate is its ability to replicate and update records without needing a programmer.

Qlik

Toad Data Point is a cross-platform, self-service, data-integration tool that simplifies data access, preparation and provisioning. It provides nearly limitless data connectivity, desktop data integration, visual query building and workflow automation.

Quest Software

Sample Customers

American Cancer Society, Fanzz, SM Retail, Smart Modular, Tangerine Bank, Wellcare

Concordia University

Buyer's Guide

Qlik Replicate vs. Toad Data Point

March 2026

Free Report: Qlik Replicate vs. Toad Data Point

Find out what your peers are saying about Qlik Replicate vs. Toad Data Point and other solutions. Updated: March 2026.

DOWNLOAD NOW

885,311 professionals have used our research since 2012.

See our Qlik Replicate vs. Toad Data Point report.

See our list of best Data Integration vendors.

We monitor all Data Integration reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.