No more typing reviews! Try our Samantha, our new voice AI agent.

Everpure FlashArray X NVMe vs SolidFire comparison

Why PeerSpot?
Sponsored
 

Comparison Buyer's Guide

Executive SummaryUpdated on Jun 3, 2026

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Categories and Ranking

Everpure FlashArray
Sponsored
Ranking in All-Flash Storage
2nd
Average Rating
9.0
Reviews Sentiment
7.2
Number of Reviews
234
Ranking in other categories
No ranking in other categories
Everpure FlashArray X NVMe
Ranking in All-Flash Storage
17th
Average Rating
9.0
Reviews Sentiment
6.7
Number of Reviews
36
Ranking in other categories
NVMe All-Flash Storage Arrays (6th)
SolidFire
Ranking in All-Flash Storage
31st
Average Rating
8.2
Reviews Sentiment
7.1
Number of Reviews
33
Ranking in other categories
No ranking in other categories
 

Mindshare comparison

As of November 2026, in the All-Flash Storage category, the mindshare of Everpure FlashArray is 6.4%, down from 6.5% compared to the previous year. The mindshare of Everpure FlashArray X NVMe is 2.5%, up from 1.1% compared to the previous year. The mindshare of SolidFire is 1.7%, up from 0.2% compared to the previous year. It is calculated based on PeerSpot user engagement data.
All-Flash Storage Mindshare Distribution
ProductMindshare (%)
Everpure FlashArray6.4%
Everpure FlashArray X NVMe2.5%
SolidFire1.7%
Other89.4%
All-Flash Storage
 

Featured Reviews

Cristian Ion - PeerSpot reviewer
Senior Information Technology Engineer at Eta2u
All-flash storage has unified my clients’ workloads and has reduced TCO through efficient data services
The pricing and licensing of Everpure FlashArray is a problem because Everpure is considered more expensive than competitors. IBM, Lenovo, and Dell are more aggressive on prices. It is a very complicated market, especially now, and I understand the prices are higher at Everpure because of the software and all the enhancements it has. However, in this competitive market, we have a big problem selling to customers that are on a tight budget. A product with better pricing would be a win in the end. The RC or C20, for example, was a very good product that I could sell more easily than other options. Everpure FlashArray//C is sufficient for most workloads and virtualization workloads if you do not have very large databases. A product like that helps, and perhaps a new product in the future that is a little cheaper than the current options would be a possibility to gain more market share. I see the return on investment clearly from using Everpure FlashArray, but the challenge is selling it to customers for the first time. There are many customers who fall in the sweet spot where they are too small for an X or even a C model. They need something a little cheaper, they have the money for a cheaper version, and they need the performance of a Pure system. These customers could be more easily approached if Everpure offers a version of a local device in the future that is even cheaper than the C-class. I am trying now to help customers understand the concept behind AG1. I know that AG1 is not profitable if capacity is less than 50 terabytes. However, some customers would be very willing to pay for 25 terabytes in a cloud operated by Pure and to have it accessible with very good speed. We will see what the future brings.
Jaehoon Oh - PeerSpot reviewer
Chief Technology Officer at Lambda256
Supports efficient storage management through volume snapshots and offers reliable non-disruptive upgrades
I have no specific improvements to suggest for Pure FlashArray X NVMe at this time. The performance statistics could be enhanced. I can see the performance statistics in the Pure Storage console, but it does not show the performance by 4K byte unit. It displays IOPS and bandwidth, but IOPS is about real use, and I want to know how many IOPS are currently running in 4K byte units. I cannot see that IOPS because most storage systems report their performance by 4K byte unit. I want to see Pure Storage performance by 4K byte unit to compare with other storage or other internal NVMe SSD.
Ramil Cerrada - PeerSpot reviewer
Solution lead at Globe Mobile
A versatile storage solution suitable for various workloads in cloud environments providing scalable architecture, granular Quality of Service and consistent performance
The most significant benefit lies in its exceptional performance, driven by its Flash-based architecture. This enhances routing speed and, consequently, database performance. The provisioning process is efficient and doesn't demand higher latency, ensuring optimal data transfer performance which is particularly valuable for tasks like data mining, where quick results are essential.

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Pros

"This is the best all-flash storage array on the market."
"Despite the overuse of buzzwords and re-classifications, the storage industry has actually seen dramatic improvements over the last 3-4 years."
"I never have to worry about its performance or if it is the root cause of an issue."
"From an intangible standpoint the lack of care and feeding is notable and freed up the Storage Team to do other things."
"Technical support is good."
"The seamless integration into the public cloud has improved my organization."
"The solution offers amazing performance."
"The most valuable features are the replication of data and the continuous snapshot that we can take from the disc."
"The most valuable features of this solution are its ease of use and performance."
"If a company is looking for an All-Flash Tier and they need extreme performance for individual workloads, Pure's the way to go, over something like a SolidFire."
"It has good, reliable, and fast storage."
"The high availability of the product is the most valuable feature."
"Technical support has been helpful and responsive."
"The latency is good."
"The most valuable feature of this solution is its ease of use."
"Offers excellent features like efficient data reduction, a reliable SafeMode, and a great support model for continuous assistance and updates."
"Feature-wise, it is a good solution allowing users to monitor and simplify their networks. The solution also provides its users with flexibility by enabling them to utilize its extensions."
"The quality of service for minimum iOS, to maximum iOS in a multi-terminal environment is very powerful. The SQL service feature is the best part of SolidFire."
"Each time I have been in contact with technical support, it has been proactive."
"If you buy the solution for its specific purpose it will work well."
"It is very easy to scale up SolidFire."
"Provisioning times have gone down and a lot of the random errors from different things that we've seen across time kind of all went away."
"With a SolidFire I think that problem goes away."
"With this solution, you can actually do more with less, having more tenants and more applications with less space and a lower dollar per gigabyte by increasing utilization up to four or five times."
 

Cons

"The negative aspect of Everpure FlashArray is that migrations can be somewhat complicated."
"Everpure FlashArray can be improved by making pricing more competitive, providing more detailed performance ratings, and offering better customization options."
"Enhanced documentation and beginner-friendly guidelines would benefit users with less configuration experience."
"I would like the ability to swap out the network adapters into it. So, without taking out the whole controller, I would like to be able to swap adapters. This would make things easier."
"There are scenarios with very specific functionality around VMware integration particularly to do with the way we'd like to manage LUNs in VMware. The tools are pretty good but there's room for improvement there."
"A noticeable area for improvement is the support for object storage."
"Data reduction is an area that needs improvement. There is a garbage collection service that runs but during that time, system utilization increases."
"The initial setup of the product is complex."
"One point I'd like to improve is that the tool should start selling small boxes again. It discontinued some products and is focusing on bigger, more capable boxes, neglecting the SMB market. Even though it's not a big market, it shouldn't have removed them."
"We've seen that when we create a POD in synchronous mode, it increases the latency."
"The UI for this solution needs to be improved."
"Efficiency improvements would always be welcome, but I'm not sure if they could get more efficient."
"In terms of what needs improvement, the dashboard and management could be simplified."
"I want to see Pure Storage not only be for fast storage, but I want to see it be for the entire data center."
"The tool's portfolio is minimal. It is expensive."
"It feels more suitable for small and medium-sized businesses rather than enterprises."
"The scalability of HCI or SolidFire as such isn't a concern, but when you compare it to PowerMax or NetApp AFF series devices, scalability is a concern because it's only the drives that are connected to the nodes. We don't have any shelf connectivity."
"It's a very good Windows-type solution. But we do a lot of legacy systems and the like. So it's getting that incorporated into it that would help us."
"It would be good to provide administrative access at the root level to be able to do things with the system, if need be."
"I would like to see more of the fiber channel connect, legacy-type, Linux-type front-ends to it."
"SolidFire could improve in terms of hardware robustness."
"I now know their best practices associated with allocating IOPS to your LUNs; I wish that was more apparent to me when actually configuring the system."
"There is room for improvement with a focus on creating a centralized storage system, functioning similar to AWS."
"We have had to stop using this solution because the price was too high for global implementation."
 

Pricing and Cost Advice

"Once you purchase Pure Storage FlashArray it is all-inclusive, you receive all the licenses needed."
"The best features come included without any additional cost."
"While more expensive than NetApp, Pure Storage FlashArray offers superior performance that often justifies the higher cost and adds value overall."
"Pure came in at a better price point than EMC and performed better than Compellent."
"The pricing of Pure Storage is all-inclusive. It is very fair, and very easy. In comparison, Dell EMC has licensing that needs to be added if you wan to work in a complex environment or in specific functionalities."
"The price of the solution is not expensive."
"The price is very reasonable when compared to other solutions."
"Pure Storage is all-flash, so this sometimes tends to make it a bit more expensive in the beginning."
"The product is expensive."
"With Pure Storage, we would like to continue seeing price reductions with flash storage. I don't think we're any different than anybody else when we continue to look to the industry for price reductions of both NVMe and traditional SSD storage. We would like to see these prices continue to decline and erode, even displacing large spinning disks."
"The tool is an investment that we've budgeted for. While the prices may be higher than those of other vendors, we see it as a market leader with benefits. We don't regret purchasing it."
"With VMware, we pay $300,000 annually."
"The support cost per array is about $20,000 a year for 24/7 support."
"The tool's pricing is cheap; I rate it a six to seven out of ten. Most of our sales are not subscription-based. We sell the hardware, and customers keep using it. They only renew the service part annually. The support can be a bit pricey, but the solution is more cost-effective than anything else out there."
"As far as the licensing costs, everything is included in the license."
"Its price could be better. It is not too expensive, but it is the high-end cost. It is kind of a Rolls-Royce. You pay a lot, but you get a lot out of it. So, the price pressure on the way down would be great, but at the end of the day, if you need to do the work, you just pay for it."
"We would probably use SolidFire more, except we're getting more bang for our buck with our purchases of ONTAP right now, and the deal we made with NetApp, so it's more of just a cost decision"
"It might be considered expensive, but when evaluating performance, it represents good value online because you pay for what you get."
"The price of this solution is more expensive than others."
"Based on what I heard from other people, its price was on the higher side."
"On a scale where one is a high price and ten is a low price, I rate the solution between three and four. It is an expensive solution."
report
Use our free recommendation engine to learn which All-Flash Storage solutions are best for your needs.
921,749 professionals have used our research since 2012.
 

Top Industries

By visitors reading reviews
Manufacturing Company
14%
Comms Service Provider
10%
Financial Services Firm
10%
Outsourcing Company
9%
Financial Services Firm
11%
Manufacturing Company
10%
Computer Software Company
9%
Government
6%
Construction Company
21%
Financial Services Firm
12%
Outsourcing Company
10%
Comms Service Provider
7%
 

Company Size

By reviewers
Large Enterprise
Midsize Enterprise
Small Business
By reviewers
Company SizeCount
Small Business75
Midsize Enterprise38
Large Enterprise162
By reviewers
Company SizeCount
Small Business14
Midsize Enterprise11
Large Enterprise13
By reviewers
Company SizeCount
Small Business8
Midsize Enterprise5
Large Enterprise17
 

Questions from the Community

Which should I choose: HPE 3PAR StoreServ or Hitachi Virtual Storage Platform F Series?
Both are great platforms, but if you are considering all flash solutions, I would recommend you to consider Pure Stor...
What is your experience regarding pricing and costs for Pure Storage FlashArray?
When comparing cost, I find that the cost is either the same or slightly higher, but that is returned by the ease of ...
What needs improvement with Pure Storage FlashArray?
The only thing I think could be improved is price. The price is the main concern for our customers.
What is your experience regarding pricing and costs for Pure FlashArray X NVMe?
The price of Pure FlashArray X NVMe is very expensive, though I do not know the actual price because I am using the E...
What needs improvement with Pure FlashArray X NVMe?
I have no specific improvements to suggest for Pure FlashArray X NVMe at this time. The performance statistics could ...
What is your primary use case for Pure FlashArray X NVMe?
My use case for using Pure FlashArray X NVMe is that my company is developing a blockchain platform for Ethereum or B...
Ask a question
Earn 20 points
 

Also Known As

Pure Storage FlashArray
Pure FlashArray//X NVMe, Pure FlashArray//X, FlashArray//X, Pure FlashArray X NVMe
No data available
 

Overview

 

Sample Customers

Nielsen, Lamar Advertising, LinkedIn, Betfair, UT-Dallas
Information Not Available
California Public Utilities Commission, RFA, 1&1, Ultimate Software , Endicia, ezVerify, MercadoLibre, Sungard Availability Services, ServInt, Elastx, Hosted Network, Colt, Crucial, iWeb, Datapipe, Databarracks
Find out what your peers are saying about Everpure FlashArray X NVMe vs. SolidFire and other solutions. Updated: November 2026.
921,749 professionals have used our research since 2012.