Try our new research platform with insights from 80,000+ expert users

Domo vs Interfacing Technologies Enterprise Process Center comparison

 

Comparison Buyer's Guide

Executive Summary

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Categories and Ranking

Domo
Ranking in BI (Business Intelligence) Tools
6th
Average Rating
7.8
Reviews Sentiment
6.6
Number of Reviews
45
Ranking in other categories
Data Integration (24th), Business Performance Management (10th), Reporting (8th), Data Visualization (7th)
Interfacing Technologies En...
Ranking in BI (Business Intelligence) Tools
28th
Average Rating
9.0
Reviews Sentiment
7.3
Number of Reviews
2
Ranking in other categories
Business Process Management (BPM) (34th), GRC (27th), Quality Management Software (40th), Document Management Software (17th)
 

Mindshare comparison

As of October 2025, in the BI (Business Intelligence) Tools category, the mindshare of Domo is 3.9%, down from 6.6% compared to the previous year. The mindshare of Interfacing Technologies Enterprise Process Center is 0.0%. It is calculated based on PeerSpot user engagement data.
BI (Business Intelligence) Tools Market Share Distribution
ProductMarket Share (%)
Domo3.9%
Interfacing Technologies Enterprise Process Center0.0%
Other96.1%
BI (Business Intelligence) Tools
 

Featured Reviews

Dave Ramos - PeerSpot reviewer
Has enabled me to integrate AI workflows and drive self-service analytics across organizations
There's room for improvement in their focus on enterprise clients. As a small business owner, there's nothing as powerful as Domo available for smaller organizations. I understand it's a business focus for them as they're looking to expand in that direction, but there's an opportunity to capture the SMB market by creating more capabilities. It's not necessarily about technical capabilities, but rather pricing that's geared towards the small business market. Capability-wise, it's very robust. If I had to stretch, I would suggest more integrations to other common tools, such as Zapier and operational tools like Mailchimp, where you can build and extend ETL in a no-code environment. While there are capabilities you can build from Domo's open APIs, having more native integrations in a no-code, low-code environment would be beneficial. Domo has many native integrations, but better tools for the SMB operational pipeline would be valuable.
SantoshKulkarni1 - PeerSpot reviewer
A Robust Solution with Enhanced Automation and Process Improvement Identification Capabilities
I recommend that users invest more time in the initial setup of the process architecture within the tool. It is crucial to spend time designing how the process architecture works as it significantly impacts how the tool behaves. This upfront investment can prevent the need for extensive reworking later on.

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Pros

"Domo's real-time insights and customizable alerts are one of their better features."
"In Workbench 5, they have come up with a very useful feature called Upsert. When you're pushing data into the data set, if the data is already available it will update the data, and if that the data is not there it will insert it. That is a beneficial feature that they introduced in the latest version."
"When it comes to Domo, we have one platform for data integration as well as for data modeling, transformations, and creating visualizations such as charts, graphs, and cards, which is beneficial because in Power BI we have multiple modules for these functions."
"The dashboarding itself was pretty easy. So both the front and the back end were positive in this case."
"Domo has a lot of connections using APIs where you can use data from different databases, such as NoSQLs, SQL databases, and other connections. These connections exist to obtain data and transform whatever that you want."
"We've worked with all the features of Domo. Among the most important are Pivot and Sumo Cards. We can use drill-down from the top-most level with a click, generating charts."
"With ETL transformations in SQL lists, you often write a lot of queries. You have to build a bunch of code for the data. With Domo, one of the pieces we have is Magic ETL. In Magic ETL, you don't need to write code. You don't need to be a specialist in SQL or any database query language."
"We have found securing data valuable because it allows us to provide information without identifying individuals."
"The most valuable feature is the integrated manner in which all the capabilities of the Enterprise Process Center platform work together and make it easier to complete the documentation of processes."
"One notable software-related benefit from a user perspective is our improved ability to identify opportunities for automation and process enhancement just by gaining a clearer view of the processes. There are two valuable aspects. First, setting up the process architecture is commendable. Second, not having to maintain different versions of processes is a notable benefit. The solution is stable. The support team is responsive."
 

Cons

"I would like to see better data intake."
"If we have unwanted data in our data set as raw data, we need to cleanse and structure it first because having excessive data in Domo will increase loading time and occupy large amounts of space."
"There's a learning curve before you can get used to the solution."
"One of the biggest problems is that end users require a license to run their own reports and dashboards, which are fairly expensive."
"There were very few cases on some of the tables, the data tables, where I wish there was an additional feature or two."
"Data integration is okay, but not the best."
"In Domo, sometimes it takes too much time to upload data. If improvements can happen in this area, that would be better."
"It is expensive."
"However, on the process mining side, there's potential for improvement to gain deeper insights into process functionality. Additionally, there's always room for enhancement in the user interface."
"As with all such platforms, Enterprise Process Center is a complex tool and there are many capabilities and features that take time to learn."
 

Pricing and Cost Advice

"Domo has more than one licensing model. You can choose between the yearly subscription and the per-user licensing model. The tool is flexible in terms of licensing. As for the cost, Domo is an end-to-end BI tool so its pricing is a little higher than other players in the market, for example, non end-to-end BI tools such as OBIEE and Tableau specific only for business intelligence and presenting data to the end users, unlike Domo which handles everything. You want to get Domo as an integration tool, an ETL tool, etc. As the tool is end-to-end, its cost is always going to be a little higher than other BI tools, but it's worth paying because you won't have to spend extra for other activities. After all, Domo can do those activities."
"They've built an "app economy." Some of them are really expensive, so they're not for startups and smaller companies. They're more like enterprise tools. We couldn't afford some of them, because they were so crazy expensive. But if I was working for a bank, insurance company, or some bigger corporation then, for sure, you could justify those prices... It was silly expensive back then and it probably still is, or even more expensive."
"Domo is slightly costly but it's much cheaper than some."
"It is on the pricier end."
"I think it is reasonable."
"I believe that the investment in Domo was worthwhile because it allowed for the organization to jump in quickly, with little training. There are different plans available based on the requirements."
"Because it's software as a service, it's more expensive on the face of it. But there are a lot of variables. I don't have to pay for servers or for infrastructure. I don't have to pay labor for my IT organization to set up or maintain the environment. I don't have to pay for them to upgrade the software, and test it, etc., because when it rolls out, it is transparent and seamless for us. But, because of that, it costs more, I imagine, than Sisense, or Yellowfin, or Power BI. A lot of those make it sound like they're inexpensive, but when you add in all the hidden costs and all of the overhead, it's probably comparable."
"No matter if you're a developer or an end-user, the licensing cost is around $12 per user per month."
"My advice for anybody who is implementing this product is to understand what options you believe you are going to want to implement and rollout in the first three to five years, but spend the most time understanding what the set-up costs and pricing will be in the first two or maybe three."
report
Use our free recommendation engine to learn which BI (Business Intelligence) Tools solutions are best for your needs.
869,566 professionals have used our research since 2012.
 

Top Industries

By visitors reading reviews
University
12%
Computer Software Company
10%
Financial Services Firm
9%
Manufacturing Company
7%
No data available
 

Company Size

By reviewers
Large Enterprise
Midsize Enterprise
Small Business
By reviewers
Company SizeCount
Small Business16
Midsize Enterprise11
Large Enterprise20
No data available
 

Questions from the Community

What do you like most about Domo?
All our client SLAs and daily and weekly dashboards are tracked on Domo.
What is your experience regarding pricing and costs for Domo?
Domo's pricing is high compared to other BI tools, and it is costly. I do not find Domo cost-effective; it would be very hard if it is a single user. However, if it goes with the organization's uti...
What needs improvement with Domo?
I have not used Domo's collaborative features extensively. Regarding Domo's AI-driven insights in uncovering trends and forecasting outcomes, the limiting factor is that you need to define all of y...
What do you like most about Interfacing Technologies Enterprise Process Center?
One notable software-related benefit from a user perspective is our improved ability to identify opportunities for automation and process enhancement just by gaining a clearer view of the processe...
What needs improvement with Interfacing Technologies Enterprise Process Center?
While we have yet to explore the tool's capabilities fully, I can't think of any immediate drawbacks. However, on the process mining side, there's potential for improvement to gain deeper insights ...
What is your primary use case for Interfacing Technologies Enterprise Process Center?
We use the solution for finance processes, specifically for accounts payable and accounts receivable.
 

Also Known As

corda
Enterprise Process Center
 

Overview

 

Sample Customers

Capco, SABMiller, Stance, eBay, Sage North America, Goodwill Industries of Central Indiana, Telus, The Cliffs, OGIO International Inc., and many more!
Pepsi-Cola Manufacturing International Ltd., Pfizer Deutschland GmbH, GlaxoSmithKline, Johnson & Johnson, Bayer S.p.A., KPMG, Royal Australian Air, Orange
Find out what your peers are saying about Domo vs. Interfacing Technologies Enterprise Process Center and other solutions. Updated: September 2025.
869,566 professionals have used our research since 2012.