Does FiberHome S6800 switch support bi-directional SFP modules and how to enable them?

It is reported that the FiberHome S6800 switch (40G/100G configuration) supports bi-directional SFP modules. To enable bi-directional SFP modules on the FiberHome S6800 switch, it may be best to follow these steps:

1. Log in to the switch's web console.


2. Go to Configuration > Interface > Optical Interface.


3. Select the interface that you want to configure for bi-directional SFP.


4. Under SFP Transceiver, select Bi-Directional.


5. Click Save.

Once you have enabled bi-directional SFP on the interface, you could insert a bi-directional SFP module into the interface for the switch to detect the module and configure it for bi-directional operation automatically.

Here are some additional points to keep in mind when using bi-directional SFP modules on the FiberHome S6800 switch:

• Bi-directional SFP modules could be more expensive than standard SFP modules.


• Bi-directional SFP modules could be more difficult to troubleshoot than standard SFP modules.


• Bi-directional SFP modules may not be compatible with all devices.