Try our new research platform with insights from 80,000+ expert users

OpenText Network Operations Management vs Statseeker comparison

 

Comparison Buyer's Guide

Executive SummaryUpdated on Oct 10, 2024

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Categories and Ranking

OpenText Network Operations...
Ranking in Network Monitoring Software
61st
Average Rating
8.6
Reviews Sentiment
7.7
Number of Reviews
3
Ranking in other categories
Network Management Applications (20th)
Statseeker
Ranking in Network Monitoring Software
60th
Average Rating
8.2
Reviews Sentiment
7.6
Number of Reviews
38
Ranking in other categories
No ranking in other categories
 

Mindshare comparison

As of May 2025, in the Network Monitoring Software category, the mindshare of OpenText Network Operations Management is 0.2%, up from 0.1% compared to the previous year. The mindshare of Statseeker is 0.2%, down from 0.3% compared to the previous year. It is calculated based on PeerSpot user engagement data.
Network Monitoring Software
 

Featured Reviews

AhmedBahgat - PeerSpot reviewer
Dynamic discovery and effective network topology make IT monitoring valuable
The solution enables dynamic discovery and incorporates a powerful configuration management database, CMDB, along with a strong correlation engine. It covers the entire span of the infrastructure, including servers and network operations. It also adapts well to different environments, showing network topology effectively, making the network monitoring tool quite valuable.
JH
Simplifies monitoring and provides real-time alerts for issues we might not immediately be aware of otherwise
The product has improved our organization by simplifying monitoring and giving real-time alerts for issues we might not immediately be aware of otherwise. If we notice five devices with latency or errors, I wouldn't know that if I didn't command line into 800 devices and check every day. I can see the status on the dashboard and it just makes it easy to know where the problems are. If we didn't have that capability by using Statseeker, then it would be very complex to monitor. We'd need to have another tool or manually log into every device to try to check things. And this product just does it all for us. That streamlines and improves our workload so that we only need to have two people in our office for the network team. It improves availability. If a circuit goes down texts and email alerts get sent out. So, even if it's in the evening or we're not on premises, we'll know if something's down. We use it all the time because it really helps.

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Pros

"The solution enables dynamic discovery and incorporates a powerful configuration management database, CMDB, along with a strong correlation engine."
"When it comes to customization, Micro Focus is more mature than its competitors."
"We can detect non-compliant devices and automate remediation actions to cover the gap in the configuration standards."
"The solution enables dynamic discovery and incorporates a powerful configuration management database, CMDB, along with a strong correlation engine."
"Device grouping is very easy, and you can discover thousands of devices in a few minutes."
"We are a smaller enterprise, but we're watching approximately fifteen-thousand switchboards with no problem at all."
"The most valuable feature is the dashboard, where you have everything right there on the screen."
"The product simplifies monitoring by providing real-time alerts through a GUI dashboard, email and texts."
"The most important for us is how fast this solution is, as well as the granularity that you can get to, such as per-minute statistics."
"I like the fact that I can aggregate multiple interfaces into a single graph. It allows me to quickly the summary of traffic for multiple devices which is helpful."
"It is fairly simple and easy to use as an all-purpose network monitor."
"The most important feature for us is the interface statistics, because our customer normally asks us for bandwidth utilization reports. Statseeker has very descriptive transmit and receive information."
 

Cons

"It may need a more customizable UI."
"The user interface is outdated and needs improvement, especially for service and topology maps."
"The user interface is outdated and needs improvement, especially for service and topology maps."
"Micro Focus Network Management doesn't support end-to-end monitoring of cloud infrastructure. Micro Focus might have different cloud solutions for cloud automation and hybrid cloud management. There are a lot of products that also support automation. That is different, but it should monitor the cloud from an IT operations management perspective."
"The user interface needs a great deal of improvement."
"We haven't seen an ROI."
"If it had more detailed NetFlow information then it would be far better."
"Technical support for this solution is bad, as is everything with Cisco support."
"I would like to have soft alarming. If an inner-base all of a sudden triggers a threshold, we have to rely on a lot of other tools and then we go into Statseeker to verify it. If Statseeker would confirm it preemptively and trigger it into our network panel, that would be nice."
"There is a little bit of room to improve in the alerting section to give some more options there. It's all I can think of right now off the top of my head."
"I would like to see some layer two and layer three topology mappings, similar to what NNMi and SolarWinds presents."
"It may be helpful to have more options in the alerting section."
 

Pricing and Cost Advice

"Micro Focus' price is on the higher side, but there are other products like CA products and IBM that are more expensive. At the same time, you have to compare the maturity level of the solutions."
"The yearly cost varies as per the number of devices being monitored. The cost for 25,000 devices is about $4500."
"We paid $5,000 to $10,000 a year in maintenance."
"Statseeker is pretty cheap."
"We now feel the pricing is a good value. Previously we had a just a normal license but now we've got an Enterprise license. Since the Enterprise, it's been a lot better value. We did think it was pretty expensive before, but with the Enterprise license it's almost less than half that price. If you have a number of accounts within the organization that use Statseeker, I would suggest get the Enterprise license."
"The licensing cost is yearly and it's $5,000 to $8,000, I think."
"We have permanent licenses so there's really no cost, other than ongoing maintenance. When I think about it, that's running us about $20,000 a year."
"This tool would probably be priced well if it had deeper NetFlow capabilities, but for our use case, in particular, we're only recovering ports after ninety days and looking at circuit congestion, it's pretty pricey."
"Up until we actually talked to Statseeker, and Statseeker came and gave us an enterprise licensing model for multiple accounts, I would have said the pricing was not good value. The fact they've come to the party now and given us a very good discount, I would say it's probably about right, the pricing they're giving us now. But the retail pricing, if I went out and, as a separate company, and asked for pricing for one account, I probably would say their retail pricing is not competitive. The fact that they've given us a discount now because we have multiple servers across multiple accounts, I would say that pricing is about right, but not their retail pricing. It's too expensive."
report
Use our free recommendation engine to learn which Network Monitoring Software solutions are best for your needs.
850,671 professionals have used our research since 2012.
 

Top Industries

By visitors reading reviews
No data available
Financial Services Firm
19%
Computer Software Company
8%
University
8%
Energy/Utilities Company
8%
 

Company Size

By reviewers
Large Enterprise
Midsize Enterprise
Small Business
No data available
 

Questions from the Community

What needs improvement with Micro Focus Network Operations Management?
The user interface is outdated and needs improvement, especially for service and topology maps. The ease of generating dashboards for different situations by users is critical for my environment. I...
What is your primary use case for Micro Focus Network Operations Management?
I use the solution as the main vehicle to monitor and alert about events in the IT environment. I use it for IT monitoring.
What is your experience regarding pricing and costs for Statseeker?
We are content with our current setup and its features. Additionally, we appreciate Statseeker's responsiveness to our queries and requests for improvements, particularly in monitoring. The upcomin...
What needs improvement with Statseeker?
There is a need for many developments to mature Statseeker. It should provide a study use case to show how it monitors the SD-WAN service.
What is your primary use case for Statseeker?
Statseeker provides the basic monitoring status of our network elements, including latency, ping delays, and ping drops. Its strengths lie in a couple of areas. Firstly, it is not an expensive tool...
 

Also Known As

Micro Focus Network Operations Management
No data available
 

Overview

 

Sample Customers

Information Not Available
With active deployments in over 22 countries and many Fortune 100 firms, Statseeker monitors millions of interfaces in real-time. Some example customers include: FedEx, Optus, Verizon, California State University, Department of Agriculture and Fisheries, Monash University, Texas A&M University.
Find out what your peers are saying about OpenText Network Operations Management vs. Statseeker and other solutions. Updated: April 2025.
850,671 professionals have used our research since 2012.