Try our new research platform with insights from 80,000+ expert users

IBM BNT vs NETGEAR Switches comparison

 

Comparison Buyer's Guide

Executive Summary

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Categories and Ranking

IBM BNT
Ranking in LAN Switching
13th
Average Rating
0.0
Reviews Sentiment
8.1
Number of Reviews
1
Ranking in other categories
No ranking in other categories
NETGEAR Switches
Ranking in LAN Switching
4th
Average Rating
8.2
Reviews Sentiment
7.0
Number of Reviews
56
Ranking in other categories
Ethernet Switches (3rd), AV Over IP Switching (2nd)
 

Mindshare comparison

As of June 2025, in the LAN Switching category, the mindshare of IBM BNT is 0.4%, up from 0.1% compared to the previous year. The mindshare of NETGEAR Switches is 7.7%, up from 7.4% compared to the previous year. It is calculated based on PeerSpot user engagement data.
LAN Switching
 

Featured Reviews

VLADIMIR RAMIREZ - PeerSpot reviewer
A low maintenance solution with cybersecurity measures
If we rate the capacity from one to ten, where one is small and ten is big, I will rate it a little more than medium for my customers. In my view, the big ones are the government accounts, but we don't have any because they're too large for us. Our typical customers include pharmacies, for example. These customers vary in size and might need storage solutions of around 50 terabytes. We have a very good relationship with our customers. We provide all the maintenance of our software. For IBM BNT, we and the customer handle all the product analysis, recommendations, and so on. When a customer has an idea or issue, they call us or make a decision and explain the problem. Usually, we have a solution, like making a configuration change—something very simple. If you ask how much time customers spend on maintenance, it's very low because the system is very stable. When advising potential customers about IBM BNT, I often suggest they talk to our current customers. Hearing directly from them about how the solutions work in real-world situations can provide valuable insights. I rate the overall product a nine out of ten.
Umang Shah - PeerSpot reviewer
Efficient routing and access control with an easy setup
We use NETGEAR Switches for networking, particularly for switch-to-switch connectivity. We connect them with core switches, especially for camera installation NETGEAR Switches have increased the throughput and speed of internal communication, and have improved our network efficiency. The most…

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Pros

"IBM BNT's latest advancements offer cybersecurity measures for network security. Our customers adapt these solutions to their sites and are very happy with the results."
"Its setup, usage, and access are most valuable. It is a very easy switch to set up."
"SFP, speed, and 10-Gigabit are the most valuable aspects of this solution. We're an architecture firm and we sometimes deal with large files. Anything we can do to eke out even a fraction of a second less time to get something done over the course of a year adds up. If I can get 10-Gigabit running in my server room, which I am right now, even though we're only gigabit to the desktop, due to the client computers we have, I can get more performance from everybody. I'm ready to start bringing in 10-Gigabit Ethernet to the desktop once I get the hardware to do that."
"Valuable features include network monitoring and ease of programming for VLANs, etc. I especially like NETGEAR because it's easy to teach system administrators how to use them, how to look at them, how to make changes to them without having the complexity of CLIs, but still having a CLI should we need it."
"The most valuable feature of the solution is that it is easy to use."
"With this, you literally just log in to a website, see all your clients, all your NETGEAR switches, and you can manage them all right there: the VLANs, powering on and off individual ports, rebooting the whole device, the firmware updates. Everything can be done remotely..."
"The ability to mix and match is invaluable. So, we didn't have to run massive super extensive switches in the data closets where it wasn't necessary. Being able to manage it all from one place, as all your network configuration settings went live across your entire building from one management console was really handy."
"We use these switches to help us leverage and connect more devices."
"As far as remoting into it goes, it is very efficient because I can do it from anywhere, through the remote software. I can get right into it, I can change settings really quickly, if a customer needs to add another device into it or if I need to make changes on the VLANs that we created."
 

Cons

"In terms of improvement, the price is not an issue; it's very good. However, the range of solutions could be improved. Some of our customers are very small, and the current IBM BNT solutions, such as switches, are too large for them. It would be wonderful if we could have switched with maybe 16 ports instead of the usual 24 ports because they don't use all the ports."
"The product's scalability has certain shortcomings that can be improved."
"They need to continue moving forward with their consulting in the AV realm to find out what is needed. They are some differences in the M4300 line and the larger M4500 line right now. They could produce a 1 Gigabit variety that could be a bit cheaper that might fit into that, since the majority of the projects that we see are still in that 1 Gigabit bandwidth threshold. Along with that, a great option would be if it would provide the same modular ability on a lower level."
"The product's stability has certain shortcomings that need improvement."
"The tool needs to improve its network management. The tool can be also more simplified."
"The web interface has been a little sketchy on occasion. Sometimes I have to reload the page to get things to show up properly, but the switch itself seems fine. The web user interface is a little wonky at times."
"Their old firmware was a problem for us and we're still working on it. It didn't apply correctly so it took about half of our switches offline, which meant we couldn't use some of the functionality like the firmware updates. Unfortunately with that firmware, which they've sorted out, if you don't go through all the firmware and make sure it's past that point and back online, that's an issue with them. It's something to cautious about"
"Perhaps in the future, we will have even more different types of switches and be able to fulfill more collections."
"The solution needs centralized management and centralized configuration."
 

Pricing and Cost Advice

"The solution is cheap. However, I think the price for the final user, who in this case is my customer, might be higher than the usual price. I emphasize the real value of the entire solution, not just the cost of the hardware and software. It's about how the solution helps the customer improve their internal operations."
"At its price point, nobody else can compare to what NETGEAR is doing at that 10 Gigabit bandwidth level. We are not seeing a lot of 10 Gigabit need right now in the marketplace. Though, we have done a few projects which have required it. We are still sort of at the 1 Gigabit requirement for the majority of our projects. Honestly, NETGEAR's 10 Gigabit offering has a better value than some of the other vendors' 1 Gigabit offering."
"The pricing for what you get with the Insight product line is very fair and the value is there, including the annual licensing fees for the Insight Pro for each device... the Insight Pro level, which is their highest level, where you get a lot of features with the Insight, is a bargain. You get a lot of good features for what you're paying there annually."
"The price-to-performance of the solution is very good. You get very performance for a low cost per port. Compared to standard AV switching, NETGEAR is probably the best value out there."
"I would rate the tool's pricing a nine out of ten."
"It's cheaper than Cisco. For the features it offers, the pricing is good."
"The product is priced economically."
"I sold someone a SonicWall and they had to redo their subscription every year. It was a $300 or $400 subscription they had to pay every year... With NETGEAR... it's only a $10 or $20 subscription per device for the whole year... and you have your license and you have all your support."
"I believe that the pricing is reasonable."
report
Use our free recommendation engine to learn which LAN Switching solutions are best for your needs.
855,156 professionals have used our research since 2012.
 

Top Industries

By visitors reading reviews
No data available
Computer Software Company
13%
Manufacturing Company
8%
University
7%
Comms Service Provider
6%
 

Company Size

By reviewers
Large Enterprise
Midsize Enterprise
Small Business
No data available
 

Questions from the Community

What is your experience regarding pricing and costs for IBM BNT?
The solution is cheap. However, I think the price for the final user, who in this case is my customer, might be higher than the usual price. I emphasize the real value of the entire solution, not j...
What needs improvement with IBM BNT?
In terms of improvement, the price is not an issue; it's very good. However, the range of solutions could be improved. Some of our customers are very small, and the current IBM BNT solutions, such ...
What is your primary use case for IBM BNT?
We create solutions for data protection and redundancy. Sometimes, we have three or four BNT switches backing up one another. We also manage many partitions and operating systems.
How do NETGEAR switches compare with Cisco ethernet switches?
NetGear switches have a lot to offer. They have high availability, zero-downtime stacking, L2 and L3 functionality, and are AV-over-IP ready. NetGear switches also have a command line interface and...
Which switches are better - Ubiquiti Unifi or Netgear?
Ubiquiti Unifi offers a great set of features. For starters, it is easy to configure and implement, and also doesn’t require a learning curve because it is easy to use. It is also simple to reconfi...
What do you like most about NETGEAR Switches?
Stability-wise, I rate the solution a ten out of ten. I have not faced any issues with the product whatsoever.
 

Also Known As

BNT
NETGEAR Insight Managed Switches, NETGEAR GC Series, NETGEAR M Series
 

Overview

 

Sample Customers

King's College London
Blaze Networks
Find out what your peers are saying about Cisco, Hewlett Packard Enterprise, Netgear and others in LAN Switching. Updated: May 2025.
855,156 professionals have used our research since 2012.