AirCheck G3 vs ManageEngine NetFlow Analyzer comparison

NetAlly and ManageEngine are both solutions in the Network Troubleshooting category. NetAlly is ranked #7, while ManageEngine is ranked #9 with an average rating of 9.5. NetAlly holds a 8.1% mindshare in NT, compared to ManageEngine’s 2.9% mindshare. Additionally, 100% of NetAlly users are willing to recommend the solution, compared to 100% of ManageEngine users who would recommend it.

AirCheck G3

Read 13 AirCheck G3 reviews

1,190 Views
1,000 Comparison Views

100% willing to recommend

ManageEngine NetFlow Analyzer

Read 2 ManageEngine NetFlow Analyzer reviews

576 Views
242 Comparison Views

100% willing to recommend

AirCheck G3

ManageEngine NetFlow Analyzer

Comparison Buyer's Guide

Download the report

Executive Summary

We performed a comparison between AirCheck G3 and ManageEngine NetFlow Analyzer based on real PeerSpot user reviews.

Find out in this report how the two Network Troubleshooting solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI.

To learn more, read our detailed AirCheck G3 vs. ManageEngine NetFlow Analyzer Report (Updated: March 2026).

Buyer's Guide

AirCheck G3 vs. ManageEngine NetFlow Analyzer

March 2026

Download the complete report

Helped 885,286 peers since 2012

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Categories and Ranking

AirCheck G3

Ranking in Network Troubleshooting

7th

Average Rating

8.6

Number of Reviews

Ranking in other categories

No ranking in other categories

ManageEngine NetFlow Analyzer

Ranking in Network Troubleshooting

9th

Average Rating

9.6

Reviews Sentiment

3.9

Number of Reviews

Ranking in other categories

Network Traffic Analysis (NTA) (8th)

Mindshare comparison

As of March 2026, in the Network Troubleshooting category, the mindshare of AirCheck G3 is 8.1%, up from 7.3% compared to the previous year. The mindshare of ManageEngine NetFlow Analyzer is 2.9%, up from 2.2% compared to the previous year. It is calculated based on PeerSpot user engagement data.

Network Troubleshooting Mindshare Distribution
Product	Mindshare (%)
AirCheck G3	8.1%
ManageEngine NetFlow Analyzer	2.9%
Other	89.0%

Network Troubleshooting

Featured Reviews

David-Prusynski

Senior Network Engineer at a healthcare company with 5,001-10,000 employees

A portable, rugged device that reduces resolution time and saves thousands of dollars

It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you can eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address. That'd be a nice function. We should be able to put an AP to MAC address in Excel and export it as a CSV file and then import it. That'd be nice to have because I have that information for all my hospitals. The one I'm doing this weekend has got 550 access points. It is much easier for me to look at an AP name than to get a MAC address. Currently, I have to go to a different spreadsheet and try to find that MAC address. If I had the AP name, it would be like, "Okay. Yep. See it. Done." They are doing spectrum analysis in G3, which I would love to have in G2. That's a nice tool to have, and from what I heard, that's the same price. I'd like to have that. The other function I would love to see is the ability to test fiber. I know the $10,000 version has the ability to test fiber, but I would love this lower-cost device to be able to test fiber.

Read full review

Aneesh Mangla

General Consultant at Computer Ware (India) Pvt. Ltd.

High cost-effectiveness and reliable alerting ensure proactive network management

Sometimes customers are unaware about their own network. For example, we need SMTP credentials for Layer 2 switches to do automatic discovery of network devices. Sometimes the network management teams are unaware of their SMTP credentials because the teams have been shuffled since the network was deployed. Or sometimes, when we support our government and defense customers, they don't have clearance to share these credentials with us. Some of the features, such as auto discoverability, get hampered if the customer is not aware of their own network or somehow can't share privileges and credentials with our tool for them to work properly. Not in ManageEngine NetFlow Analyzer in particular, but there are other features of the OpManager suite that could afford to be updated. There is something called a CLI, command-line interface, that allows us to configure network devices such as switches. This is old technology. This product suite has CLI-based configurations, but as of last year, most network devices come with Zero Touch Provisioning (ZTP). OpManager does not support this functionality, and we don't really have a timeline on when ZTP functionality will be available. In ManageEngine NetFlow Analyzer, we have to set custom thresholds to get alerted if there is a problem in network connectivity. It would be helpful if we could automate the tool such that we don't have to set thresholds manually, and the tool automatically alerts us when it detects issues. When experts deploy this tool, we already know what thresholds should be normal. But customers in general may not have this skill set. For newer customers who need to adopt this product, an automated method of alerting would definitely be beneficial.

Read full review

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Pros

"Few products provide an all-in-one platform like AirCheck, and for all intents and purposes, there's no competition in the space because no other enterprise-quality handheld testers do Wi-Fi and wired testing so comprehensively."

"It has made our networking staff more productive. We spend less time because the device helps us by identifying the issue and providing a solution for the customer. Prior to not having this device, we would have to guess when an issue arose. Now, we don't have to guess. This can easily save us hours per call."

"One device takes the place of many, which is time efficient and cost-efficient."

"AirCheck G2 gives me an overview of which channels are used by the access points or who delivers the Wi-Fi, which gives me a clear picture of what's going on."

"I bought one out of my own money, so I found enough value to spend my own money on it."

"The one-button AutoTest feature is an amazing tool. It works well. It tells you whether or not you have shorts in your network, your PoE+ is running low on voltage, and shows you your link speed."

"AirCheck has a feature that lets you play a tone so you can track down a rogue AP based on the RF signal. That's a cool feature. It can also help you identify interference like microwave ovens or Bluetooth devices. I also like the ability to link it to your online account. It sends a report via email and saves it on the cloud."

"I also like the remote session and the ability to log in to the device remotely. You can log in to the tester with your computer and can see the screen and operate the tester remotely. This is a very cool function, but it's very advanced."

More AirCheck G3 pros

"I give this solution a rating of 10 out of 10 and absolutely recommend it based on our experience."

"ManageEngine NetFlow Analyzer has detection capabilities for flow, event, and service flow."

Cons

"The biggest improvement would be an easier upload over wireless to Link-Live. Currently, the device has to be patched into the Ethernet. The wireless upload has been giving us some issues."

"My biggest complaint about it is that I wish it was cheaper."

"We use these out in the field, and because they're not allowed on our network, we usually have to have the person take them home and provide backhaul to them. In other words, they are not allowed through our firewalls to dump the data. So, we have to have them go to a separate wired network to dump the data. There could be an option to put an LTE and have a phone engine in it so that you can buy a SIM card for it and have it use cellular to download the data. That is something that would be nice to have. That's a little kink in this system right now. Other than using the Ethernet port to download data, it'd be nice if we could use either LTE or some other way to get the data that was collected by AirCheck G2 to our Link-Live portal."

"If it was capable of downloading MIBs onto the device, then we could identify the manufacturer. Sometimes, when I am troubleshooting, there is a Mac address. For example, there is a rogue device and it just gives us a Mac address, which is fine. It gives us something, which is better than nothing. It would be nice if it was able to download a MIB where we could associate it with that Mac address and the manufacturer."

"The battery life needs improvement. For example, when you are doing an Ethernet test, that seems to drain the battery pretty quickly."

"It was hard to determine which AP was which because it only shows the MAC address. It'll also display the MAC address of the BSSID, so it looked like I had 12 APs in my house. If I have three access points and each is a dual-band with an SSID or BSSID for each radio, it comes out to about 12 APs. That's one of the bugs fixed in the latest firmware update, but it's only available if you have a NetAlly support contract."

"The biggest improvement would be an easier upload over wireless to Link-Live."

"A feature I would like to see is the ability to charge the device via a PoE outlet. Usually, I need to charge it at home. It would be good to leave the device plugged in and charging at a PoE source at the customer site after a quick look at the network when I have moved on to other tasks."

More AirCheck G3 cons

"In ManageEngine NetFlow Analyzer, we have to set custom thresholds to get alerted if there is a problem in network connectivity. It would be helpful if we could automate the tool such that we don't have to set thresholds manually, and the tool automatically alerts us when it detects issues."

Pricing and Cost Advice

"If you find a feature you need, you have to call them and add it, but you should be able to use the product. You spend money on and invested in multiple devices and can't even use half of the features. They should negotiate with large enterprises who buy large numbers of units to provide NetAlly support for all of them at a nominal fee."

"I'd always love a lower price, but as compared to some of the other tools, it is fairly reasonable. I personally bought one. So, I must have thought the value was there because I'm spending my own hard cash on it, not just the company's. You can get support. I don't have support on my personal device. We did buy support for our company devices. It is reasonable. It is not super expensive or astronomical."

"The upfront cost of the solution is around $4,000."

"Pricing is on par with the rest of the industry and the licensing is decent."

"It costs $3,000. It would be nice if its cost was less. I could then buy more. Currently, when we buy one, we make sure that where we need it is big enough, or if it is too small, when a person has a job, they have to get a temporary one mailed to them to use, which becomes a little less convenient."

"Because I work in a big company, it is a no-brainer. If I were a consultant, I would still buy it, but it would be a huge investment. Overall, it's a good tool to have."

"The overall cost of the solution, compared to the time saved—the number of man-hours devoted to other means of troubleshooting—is incomparable."

"The product has a pretty good price."

More AirCheck G3 pricing and cost advice

Information not available

See which vendors are best for you

Use our free recommendation engine to learn which Network Troubleshooting solutions are best for your needs.

See recommendations

885,286 professionals have used our research since 2012.

Top Industries

By visitors reading reviews

Government

University

Comms Service Provider

Performing Arts

Financial Services Firm

19%

Educational Organization

13%

Construction Company

13%

Outsourcing Company

Company Size

By reviewers

Large Enterprise

Midsize Enterprise

Small Business

By reviewers
Company Size	Count
Small Business	1
Midsize Enterprise	2
Large Enterprise	11

No data available

Questions from the Community

Ask a question

Earn 20 points

What is your experience regarding pricing and costs for ManageEngine NetFlow Analyzer?

The price is lower compared to alternatives.

See all answers

What needs improvement with ManageEngine NetFlow Analyzer?

ManageEngine's product has some performance issues. It runs very slowly when the system is large and does not support high availability for big flow and high-level operations. The product needs imp...

See all answers

What is your primary use case for ManageEngine NetFlow Analyzer?

I use ManageEngine NetFlow Analyzer for detecting the root cause when the database and application run very slow. I have not yet used the traffic shaping feature of ManageEngine NetFlow Analyzer.

See all answers

Comparisons

AirMagnet Survey PRO vs AirCheck G3

Compared 21% of the time

NetAlly EtherScope nXG vs AirCheck G3

Compared 17% of the time

LinkRunner vs AirCheck G3

Compared 13% of the time

Broadcom Network Flow Analysis vs AirCheck G3

Compared 10% of the time

iTrinegy NE-ONE Professional vs AirCheck G3

Compared 9% of the time

More AirCheck G3 Competitors

Wireshark vs ManageEngine NetFlow Analyzer

Compared 27% of the time

SolarWinds NetFlow Traffic Analyzer vs ManageEngine NetFlow Analyzer

Compared 19% of the time

Darktrace vs ManageEngine NetFlow Analyzer

Compared 11% of the time

OneTouch AT Network Assistant vs ManageEngine NetFlow Analyzer

Compared 11% of the time

Colasoft Capsa vs ManageEngine NetFlow Analyzer

Compared 10% of the time

More ManageEngine NetFlow Analyzer Competitors

Product Reports

Buyer's Guide

AirCheck G3

March 2026

Download AirCheck G3 product report

Buyer's Guide

Network Troubleshooting

March 2026

Download ManageEngine NetFlow Analyzer product report

Also Known As

AirCheck G2, AirCheck

No data available

Overview

AirCheck G3 is the most cost-effective hardware-enabled site survey solution for Wi-Fi 6/6E networks. It provides network professionals of any skill level with complete and accurate information to survey and validate Wi-Fi deployments and changes, resolve connectivity and performance problems quickly, speed up closure of trouble tickets, and ensure your Wi-Fi network meets end users’ needs.

The new and improved battery life of 10 hours (3 - 4 hours charge) lasts you and your teams throughout the day.

AirCheck G3 Product Info

NetAlly

ManageEngine NetFlow Analyzer a complete traffic analytics tool, leverages flow technologies to provide real time visibility into the network bandwidth performance. NetFlow Analyzer, primarily a bandwidth monitoring tool, has been optimizing thousands of networks across the World by giving holistic view about their network bandwidth and traffic patterns. NetFlow Analyzer is a unified solution that collects, analyzes and reports about what your network bandwidth is being used for and by whom. NetFlow Analyzer is the trusted partner optimizing the bandwidth usage of over a million interfaces worldwide apart from performing network forensics and network traffic analysis.

ManageEngine

Sample Customers

Information Not Available

Metro Rail, Micron21, Lotus F1 Team, Elizabeth Board of Education, Queen’s University Belfast, DHL, Praxair, Adventist Health, Wipro Infotech, Tropical Shipping USA

Buyer's Guide

AirCheck G3 vs. ManageEngine NetFlow Analyzer

March 2026

Free Report: AirCheck G3 vs. ManageEngine NetFlow Analyzer

Find out what your peers are saying about AirCheck G3 vs. ManageEngine NetFlow Analyzer and other solutions. Updated: March 2026.

DOWNLOAD NOW

885,286 professionals have used our research since 2012.

See our AirCheck G3 vs. ManageEngine NetFlow Analyzer report.

See our list of best Network Troubleshooting vendors.

We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.