Share your experience using Digital.ai TeamForge

The easiest route - we'll conduct a 15 minute phone interview and write up the review for you.

Use our online form to submit your review. It's quick and you can post anonymously.

Your review helps others learn about this solution
The PeerSpot community is built upon trust and sharing with peers.
It's good for your career
In today's digital world, your review shows you have valuable expertise.
You can influence the market
Vendors read their reviews and make improvements based on your feedback.
Examples of the 83,000+ reviews on PeerSpot:

Sr. Network Systems Administrator at Moda Health
Real User
Top 5Leaderboard
Saves man-hours with excellent speed on outcomes and provides a continuous validation process
Pros and Cons
  • "It's easily expandable storage-wise and compute-wise."
  • "There's the split between Prism Central and Prism Element and having to know which interface I need to get into to do certain feature sets or just having to switch between those having all the feature sets available under for some central, area would be my biggest ask. They've been moving towards that more and more."

What is our primary use case?

The company went with Nutanix and hyper-converged. Just the sheer number of disparate vendor products and hardware the company had to deal with was a lot. The solution was used for consolidating everything into a much more easily managed payment class. Prism brings it all under one umbrella.

What is most valuable?

Prism Ultimate is where it can't get any better. We've got all the feature sets available.

We use the runbook on occasion and we don't really use a lot of automation.

We did some site migration activities with a large number of guest systems that needed to be relocated, it was pretty convenient. I don't remember experiencing any issues. We did a pretty big data center relocation and we used Nutanix protection domains to do most of that. We ran into a couple of issues outside of any automation and those were just our own configuration issues that we quickly figured out.

The speed of the outcomes we've received using the solution's low-code automation would be as expected. We have no complaints about the processes with Nutanix.

The man-hours saved are pretty important for us. We have a pretty large environment for our team to handle and anywhere we can optimize tasks more efficiently and not have to do them in scheduled maintenance Windows after hours is a big plus.

Monthly, as far as general maintenance, the systems used to have to be babysat by somebody. We save probably twenty to twenty-four hours a month in man-hours, just on being able to schedule and automate a mundane task that used to have to be handled with kid gloves.

As far as maintainability, we do tasks more efficiently and we've saved money. The ability to even just have the built-in monitoring and alerting system that is in the product by default, just by running the infrastructure under, is great. Prism Nutanix saves us quite a bit of effort and time. I don't know if you could really put a number to that time.

We use the solution to manage both Nutanix and VMware infrastructures. We are in the process of progressing towards getting as much as possible off of VMware ESX and onto AHV. We currently have about 70% on Nutanix and the remaining on ESX.

It's great that the solution can manage both of those infrastructures. It's a lot more efficient and convenient to have all of this in one payment class rather than have to monitor two separate infrastructures.

The solution helps provide a continuous validation process and it's pretty impressive. Just what you get by bringing that infrastructure under the umbrella of Prism without having to do any monitoring setup at all, covers more than 90% of what we really need. This feature's effect on our validation time is exceptional. I would say that it probably reduced it by more than half.

The solution is better than expected in terms of helping our team address our current automation needs while planning for future expansion.

Its speed when delivering infrastructure as a service has been good. We haven't had any complaints about the performance or implementation of new systems with this product.

What needs improvement?

We haven’t really gotten into the solution's capacity planning and runway analytics to help forecast storage and compute needs. Since I came in, we have been doing a lot of forklift upgrades and data center relocations. Most of the clusters have been in so much flux that the runway and those estimations haven't been accurate enough simply due to the fact that we pull the carpet out from the data and change the environment so often. Hopefully, once we have one more major cluster to put in, we'll get most of the rest of our PSX environment over. AT that point, those forecastings will be valuable to us. However, our environment and underlying hardware have been in so much flux, that nothing could really give us real accurate forecasting.

There's a split between Prism Central and Prism Element and having to know which interface I need to get into to do certain feature sets or just having to switch between them having all the feature sets available would be my biggest ask. They've been moving towards that more and more.

For how long have I used the solution?

I've been using Nutanix and Prism for nearly five years now. I came in about two years after the implementation started. It's the same product that we've been using for three years, just with a new name. We have been using the Nutanix Cloud Manager version for the past several months.

What do I think about the stability of the solution?

The stability is incredible. We are on Lenovo OEM and the only issues we've experienced since I've been on board for three years, have been related to some Lenovo firmware issues in our environment that would have caused a host outage. We've had other issues with the Nutanix solution, however, those have not impacted production or impacted the host.

What do I think about the scalability of the solution?

The scalability is great. It's easily expandable storage-wise and compute-wise. We can do that comfortably without fear of the impact on production. We do a lot during production hours that used to have to be done outside of production hours on maintenance Windows.

How are customer service and support?

In my more than twenty-five years of experience in the industry, I would say the technical support goes above and beyond any other vendor that I've ever worked with. It's probably one of their strongest points.

There have been multiple times when we've called in about some issue and the techs look into it and ensure that everything else on that cluster is copacetic as well. They won't look just at the problem. They'll say: "Hey, I noticed this, let's take care of that while we're in here." They're not trying to blow you off.

How would you rate customer service and support?

Positive

Which solution did I use previously and why did I switch?

The company never used a hyper-converged solution like Nutanix previously. There was a traditional three-tier and Nutanix was brought out to consolidate.

I have not used any other solutions like this. This was my first introduction to any type of hyper-converged solution.

How was the initial setup?

I wasn't a part of the initial setup. I came in two years after it was implemented.

The product requires maintenance. In this case, considering the breadth of our implementation, typically it's only one man dedicated for an hour or two a week. This is just to ensure things are kicking off as expected and things have been completed as expected.

Which other solutions did I evaluate?

I know the company was looking at other companies. I don't know which ones, however, as that was all pre my history with the organization. Likely, at that time, Nutanix was probably the best solution available.

What other advice do I have?

I'm a customer and end-user and we're in a long-term stable release. 

There's a lot of naming in Nutanix. There's Prism Element and there's Prism Central. This depends on how wide a view you're taking. We use both here.

Prism Pro and Prism Element are different levels of feature sets in Prism. Ultimate has more features available than Pro has, however, it's the same product overall. Prism Element is tied to a cluster of Nutanix-based systems and Prism Central is a collection of those clusters. That gives a view of the entire environment. We are Prism Ultimate licensed.

We use a private cloud as our environment is all internal to our organization.

I'd rate the solution nine out of ten.

Which deployment model are you using for this solution?

Private Cloud
Disclosure: PeerSpot contacted the reviewer to collect the review and to validate authenticity. The reviewer was referred by the vendor, but the review is not subject to editing or approval by the vendor.
Nalin Kumar - PeerSpot reviewer
Quality Assurance Group Lead at Samsung
Real User
Top 5Leaderboard
An User-Friendly Cloud-based Issue Tracking Solution
Pros and Cons
  • "The monitoring, flexibility and tracking are really good in Jira."
  • "When we use the plugin in Jira so, there are two different systems which we are working on, Jira and the X-ray plugin. The X-ray plugin should be incorporated into Jira because we have to fetch two reports. One report is faxed through Jira, and one can be faxed through X-ray. So there needs to be clarity about which the Jira team should reflect."

What is our primary use case?

Jira is used for all the project management, on all the stages of project management. So then we create a Kanban board and move on to creating the stories.

We create the story points, break down the requirements, and then create the Sprint accordingly. Based on that, we can manage in Jira how many user stories we will pick in what Sprint. And based on the dependencies of the user stories, this is the flexibility that Jira provides. Then we have also got various, you know, sub-tasks, which we have to complete to accomplish the DoD (Definition of Done). We can mark the Sprint as complete when these particular tasks are completed. So that gives very good monitoring of the project where the project is

going on.

When it comes to the testing part, so testing is end-to-end on Jira. We can take the user stories based on the acceptance criteria. The test cases are created in Jira, and the business analyst team reviews those test cases. Based on their feedback, the test cases are updated. Those test cases are being executed. So there is clear tracking of the test execution, and all the test cases are also linked with the user storage. We have end-to-end tracking of what test case is executed for what user story. So that is the best part of Jira.

What is most valuable?

The monitoring, flexibility and tracking are really good in Jira.

What needs improvement?

When we use the plugin in Jira so, there are two different systems which we are working on, Jira and the X-ray plugin. The X-ray plugin should be incorporated into Jira because we have to fetch two reports. One report is faxed through Jira, and one can be faxed through X-ray. So there needs to be clarity about which the Jira team should reflect.

For how long have I used the solution?

I have been using Jira for eight years. 

What do I think about the stability of the solution?

Jira is a stable product. I have seen the growth in the solution’s stability for the last eight years. The current version is quite stable and is a robust system.

What do I think about the scalability of the solution?

Overall, the solution is scalable. Jira is quite easy to scale. If we have five projects working on Jira and we have about five more projects to be incorporated, it's easy to install Jira for those five projects as well. Presently, twenty five thousand users are using Jira. 

How are customer service and support?

We have been using this for the last eight years and we are quite accustomed to that. We don’t need much support from Jira or Atlassian. Yes, but we have got an enterprise version of that, and their support is quite quick.

How would you rate customer service and support?

Positive

Which solution did I use previously and why did I switch?

I was using HPE Quality Management Tool.

How was the initial setup?

The initial setup of Jira is very easy. I have been an administrator, so I would say that because used to it. But in comparison to other systems, yeah, it’s quite easy and user-friendly. The deployment takes two to three days of time. Forty people are required for the maintenance of the solution.

What about the implementation team?

I implemented it myself as an administrator of Jira.

What's my experience with pricing, setup cost, and licensing?

Compared to the value Jira provides, it’s not that expensive. It has an yearly licensing cost.

What other advice do I have?

Use all the reports which are generated. You have to make a system for the process. Here is a small example during a subtask. The time input via the source is not mandatory. But you have to make it mandatory either from the back end.

You’ll not be able to fetch the reports on the performance, the health of the project, capacity management, or IT management if the data is not input properly. So this is something which people most people don’t take care of as a Jira planning. But when you plan a project, you have to plan these things.

I rate the overall solution a seven out of ten.

Which deployment model are you using for this solution?

Private Cloud
Disclosure: I am a real user, and this review is based on my own experience and opinions.
Flag as inappropriate