Try our new research platform with insights from 80,000+ expert users

Alcatel-Lucent OmniSwitch Ethernet Switches vs D-Link Ethernet Switches comparison

 

Comparison Buyer's Guide

Executive SummaryUpdated on Nov 3, 2024

Review summaries and opinions

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Categories and Ranking

Alcatel-Lucent OmniSwitch E...
Ranking in Ethernet Switches
17th
Average Rating
8.6
Reviews Sentiment
7.5
Number of Reviews
12
Ranking in other categories
No ranking in other categories
D-Link Ethernet Switches
Ranking in Ethernet Switches
14th
Average Rating
7.8
Reviews Sentiment
6.4
Number of Reviews
30
Ranking in other categories
No ranking in other categories
 

Mindshare comparison

As of July 2025, in the Ethernet Switches category, the mindshare of Alcatel-Lucent OmniSwitch Ethernet Switches is 0.8%, up from 0.7% compared to the previous year. The mindshare of D-Link Ethernet Switches is 5.4%, down from 5.7% compared to the previous year. It is calculated based on PeerSpot user engagement data.
Ethernet Switches
 

Featured Reviews

OusaidAbaz - PeerSpot reviewer
Doesn't have many proprietary protocols but some models have stability issues
We had stability issues with Alcatel-Lucent OmniSwitch Ethernet Switches 6250. One issue is with licensing. When migrating from TDM to VoIP/ToIP solutions integrated on the same architecture, Alcatel-Lucent OmniSwitch Ethernet Switches don't have the same skill level or follow the same development path as companies like Cisco. They started integrating these solutions later, which is why there's a noticeable difference in advancement. Their main focus has been IP PBX solutions like OXO and OXE. They developed their IP environment and switches later, but not as deeply as other vendors. For example, they use Aruba access points and controllers for wireless solutions rather than developing their own portfolio. A specific challenge I've faced is with access points. Due to country code restrictions, the model sold in one region (like Europe) may not work properly in another. This affects channels and features related to the electronic environment specific to each country. To resolve this issue, I've had to reconfigure access points with the correct country code. The solution uses basic protocols. It doesn't have proprietary features like Cisco's EIGRP or advanced BGP features; it's based on standard protocols.
Daniel Kivuthi - PeerSpot reviewer
Fits well in networks, integrate well but initial setup needs trained people
I did not face any major challenges, but the only thing is that D-Link has to invest in training technicians or engineers who install their products. They have to keep training them. D-Link can offer free training, or maybe even if they are charged, it's some fair charge. That way, D-Link encourages many technicians to take that training. And when the team has trained technicians or trained engineers, then it becomes very easy to install the devices and put them in the network. The solution integrates very well with our existing network infrastructure. The initial setup is straightforward. But, again, I will insist: If it is handled by trained personnel, then you find that the integration and installation are easy. But when people try to install the switches or the solutions and they do not have the technical know-how, then it becomes a challenge. People start saying that it's not a good solution, that they are not working. Yet, it is the technician who does not know how to handle them.

Quotes from Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:
 

Pros

"The product's initial setup phase is not complex. It is easy to install the tool."
"We are able to customize this solution based on the customer's requirements."
"The new web graphical interface is much better than before. We now have easy access to the command lines. They're all functional."
"The fibre ports that are 10 Gb capacity helped with the travel of a lot of regular as well as video data. Fibre can handle a lot more virtual data than copper twisted-pair, so we got a lot more data and a lot more traffic signals back through the fibre ports, faster, than with copper."
"Enables direct access to clusters."
"The solution has a very good web interface. It makes it easy to manage everything."
"It's easy to extend the stack, We don't use the smaller switches, but it's going well for the rest."
"This is a dependable switch which will help you sleep at night."
"D-Link has a graphical interface that is easy to use. It is simple enough that our junior technicians can configure the switches."
"It is very stable and reliable."
"I have no complaints about the stability or reliability of D-Link Ethernet Switches."
"The initial setup of D-Link Ethernet Switches is very easy."
"The solution is user-friendly."
"The initial setup was very easy and user-friendly."
"It is a stable solution."
"D-Link has a good VPN feature and quality of service."
 

Cons

"In future versions, I would like to see improvements in networking speed."
"The commands for the switches could be easier as I find them more complex compared to those of Cisco."
"There needs to be better integration with the interface."
"The network connection should be improved."
"I could see them possibly creating a more intuitive software. It's very user-friendly, but there are some things that aren't very intuitive when programming the switches."
"I find the CLI hard to use. I wish we could do more in the GUI interface."
"technical support response time is sometimes very slow."
"The product would be better if it were completely compatible with other switching products."
"For high-end switches, the price could be 5% to 10% cheaper. Improvements in the voltage facility, like increasing from 360 watts to 400 or 450 watts, would make them more competitive with other vendors."
"I would like an option to create different networks within the switch."
"The technical support needs a lot of improvement."
"The D-Link Ethernet Switches have to be replaced because they are difficult to manage and security is poor. They should add centralized manageability to make the solution better, it will allow administrators to better know what is happening on the network."
"We have issues with the stability."
"D-Link Ethernet Switches' switching capacity is low. The solution should improve stability and not support Cisco or Juniper networks."
"It should be more stable, and it should have good integration with the cloud. It should support configuration, supervision, and control through the cloud."
"The solution needs to improve layer 2 switches."
 

Pricing and Cost Advice

"The pricing is reasonable compared to Aruba and HPE."
"The licensing for OmniSwitch Ethernet Switches is a one-time purchase with no additional costs."
"It is an expensive solution."
"Pricing is cheap compared to other vendors. When we benchmark the tool against Meraki, Cisco, and others, it is usually more affordable."
"These units vary in price from $200 to one thousand dollars. They're available for a one-time purchase."
"The D-Link Switches are cheaper than Cisco."
"This product is very affordable, especially compared to Cisco."
"They were cheap. We were not paying for any license."
"It is an affordable solution."
"The solution's pricing is reasonable."
"The price of D-Link Ethernet Switches is in the 4,000 to 5,000 rupees or 65 to 100 USD range. The price of the solution is not expensive."
"D-Link Ethernet Switches' price is good."
report
Use our free recommendation engine to learn which Ethernet Switches solutions are best for your needs.
860,168 professionals have used our research since 2012.
 

Top Industries

By visitors reading reviews
Comms Service Provider
10%
University
8%
Computer Software Company
8%
Financial Services Firm
8%
Computer Software Company
13%
Comms Service Provider
9%
Healthcare Company
9%
Manufacturing Company
8%
 

Company Size

By reviewers
Large Enterprise
Midsize Enterprise
Small Business
 

Questions from the Community

What do you like most about Alcatel-Lucent OmniSwitch Ethernet Switches?
The new web graphical interface is much better than before. We now have easy access to the command lines. They're all functional.
What is your experience regarding pricing and costs for Alcatel-Lucent OmniSwitch Ethernet Switches?
In terms of pricing, Alcatel is cheaper than Cisco, however, MikroTik is the cheapest. I cannot comment on the pricing reasonability as I am a technical person, and decisions are made by those who ...
What needs improvement with Alcatel-Lucent OmniSwitch Ethernet Switches?
The commands for the switches could be easier as I find them more complex compared to those of Cisco.
Would you recommend replacing a Cisco Catalyst Switch by a D-link one?
Hello Mesfin It depends on the real scenario, the cisco 2960 is a very good device and they usually have routing functions but there are many different models within the same 2960 line, and on the ...
What do you like most about D-Link Ethernet Switches?
D-Link has a good VPN feature and quality of service.
What is your experience regarding pricing and costs for D-Link Ethernet Switches?
D-Link Ethernet Switches are 30% cheaper than Cisco switches. Pricing has not been a concern since it is already included in the capex.
 

Also Known As

Alcatel-Lucent Ethernet Switches, OmniSwitch Ethernet Switches
No data available
 

Overview

 

Sample Customers

Bayonette, California State University (CSU), Centre Hospitalier Carcassonne, Centro Universitšrio de Brasilia (UniCEUB), China Tianchen Engineering Corporation Co. LTD, Citta Della Speranza, City of Frankfurt, City of Ogden, City of Vila Franca de Xira
George Mason University, Somerville House, Hiperwall, New Brunswick School District 16, The Fulcrum Group, Bremond Independent School District, University of Texas Health Science Center, Grand Canyon Skywalk, SUN Area Career & Technology Center, Abington Senior High School
Find out what your peers are saying about Alcatel-Lucent OmniSwitch Ethernet Switches vs. D-Link Ethernet Switches and other solutions. Updated: June 2025.
860,168 professionals have used our research since 2012.