We performed a comparison between Datto Remote Monitoring and Management, Kaseya VSA, and LogMeIn Central based on real PeerSpot user reviews.
Find out what your peers are saying about NinjaOne, Kaseya, TeamViewer and others in Remote Monitoring and Management (RMM).
"The alerting system helps us determine what are high level alerts, and what are alerts which can wait for a day or two. We catch RAID failures, hot servers, bad drives (or predicted failures on drives), etc."
"The project management and task management features work well. It's a decent product in that regard."
"We support nine different nonprofits, and the billing took the manager three or four days working on spreadsheets. When I finished automating everything with Datto, we cut everything down to a couple of hours. That's a substantial cost savings on the billing side."
"The remote tool is nice. If a user needs assistance, I don't have to tell the user to do anything. I just ask the user if I can remote in, and 30 seconds later, I have remoted in. It has been really handy."
"Automation, in terms of the standard patches and standard updates, and remote support are valuable. When it does the standard Windows and patches, it works really well. This is something they focus on. Remote support is also something they focus on quite a bit, and it works really well. Being able to get to an agent or a client computer right away is very helpful."
"AEM support is great for Macs."
"Even when the connection to the server is lost, the monitoring continues without interruption."
"I also like how Datto integrates seamlessly with the Autotask ticketing system."
"The remote management is quite good. Also, the patch management and service desk are great features of the solution."
"The remote support is the most valuable aspect of the solution."
"The product's support team is very quick to respond, especially because the tool's technical team operates in the same time zone where I am located."
"As a small IT shop, the weird feature that the VSA has that I have not found anywhere else is they have these little colored dots that tell you the status of the machine. Is it offline and powered up? Is it actively being used? Is it idle? A lot of our clients ask us to do things for them, but, of course, they don't really want us to be underfoot. So we always look for, "Hey, there's an idle machine. We can work on that one now." And to say it makes it easy, we can do that at a glance. In any other tool we've looked at, you have to go several layers deep to see if the machine is in use, and you could spend your entire day just trying to find a machine that was idle, whereas, with Kaseya VSA, you can tell at a glance."
"The backup tool is highly useful, offering a fast and efficient way to retrieve and restore data."
"Patch management was very useful. Backdoor access to the clients was also very useful."
"The solution was scalable."
"The ease of access and ease of use was great."
"For me, it's convenience because I cover three different offices, and I need to be able to remotely access any of those three offices from anywhere, anytime. With LogMeIn Central, I can do that."
"This solution has allowed granular permission access to machines, very consistent and solid most of the time."
"I have called for help to their technical support, and they have been extremely helpful."
"Using the product, we provide a quicker response when supporting customers."
"Unattended Access, allows me to do support on machines that people are having trouble with, during non-working hours."
"The initial setup was pretty straightforward."
"I like the security aspect, that I can glance down and see quickly who's up to date on patches, and who has virus concerns."
"I would not want to tell other companies about it because it is so powerful, it does so much, and it makes me look so good."
"Sometimes we have some downtime when Datto is doing updates. Maybe it's because of the cloud service they use. I'm not sure if they're going through AWS or Azure or what. That's happened, but the outages have been few and far between."
"The actual setup and the automation of their product are horrific. When you buy it, there is nothing out of the box. You have to custom design it for everything you want it to do. You pay for implementation, but they don't really do a whole lot to help you get it going. I know it does a lot more than what ours is set up to do, which is frustrating. When I've demoed other systems, their setup is so much better. When you pay for their setup, there is so much more, whereas I just feel like we didn't get a very good setup."
"They have a tab to provide information about the type of hardware the computers have. One thing they don't specify is what model of hard drive the computers have. Identification of storage models would be nice."
"My most significant criticism is Datto is a complex product that takes a while to understand, but that could be said of almost any solution at the same level. It depends on where you're starting from. You have to rework all your workflows, and it's some heavy lifting if you want to get it right."
"Be prepared to spend a lot of time on conversions if you have a lot of clients."
"The only area where I see room for improvement is the ability to delay the application of patches for a set number of days."
"We would like to see a little more functionality when monitoring network devices, such as switches and routers."
"I would like the ability to remotely manage configuration and settings on individual units. Some organizations have a certain device configuration that needs to be consistent across all computers. For example, if we have computers that cannot go to sleep or hibernate because they're being accessed remotely, we need to be able to quickly configure those computers to not hibernate. With Datto, there is no easy and/or direct way to accomplish this. I can't create a group called No Hibernate and drag all those computers to that group so that they do not go into hibernation. There is no easy way to put in a policy or a procedure like that. It's still back to going to each computer and doing it by hand, which is what I'm trying to get away from. I want to automate and simplify as much as possible. I write code and scripts to do most of my work anyways. The intention is to get away from me having to be so hands-on."
"Its scripting language kind of sucked. They have their own version of PowerShell inside VSA. if you want to reach out and grab endpoint information, for instance, to know how many end devices have a program installed, you actually have to write a script for that. It wasn't like how it is in CrowdStrike where you can just do a search, and it just happened. In VSA, you have to write your own script to do it. In terms of new features, an integrated MDM for mobile devices would be awesome."
"I have been looking for a way to deploy patches via the internet to selected equipment from Kaseya VSA, but it seems impossible."
"It never functioned as intended."
"There should be more Mac support. Whenever a new Mac operating system comes out, the support is very limited. It takes them a while to get things up to date. We're seeing more and more people move to Mac from the Windows environment for various reasons, but their support for Mac is very limited. A lot of it might have to do with Mac itself, but there are ways to improve upon that. That would be my biggest thing for improvement."
"The product's user interface is an area with certain shortcomings where improvements are required."
"The way it is laid out can be improved. If it could be a little more intuitive, it might be a little bit easier. Sometimes, it is hard to find features because they're called something weird, or they're in an interesting location that you wouldn't have thought that they'd be in."
"It's very difficult to update the third-party software on every device."
"I would like to see improved virtual infrastructure management."
"It's not really a true RMM product but more of just a remote access."
"The update issues are an absolute pain. It says it is updating things, but the updates do not go through, and you try your hardest to get the updates to go through and they don't. You go to the PC, but there is no update there, then you go back and it says there are updates."
"It is easy to get locked out, which is something that needs to be improved."
"Our clients are having issues with printing."
"There are some screens that are just ugly and difficult to manipulate."
"I do not like the antivirus."
"It needs backwards compatibility for non-Microsoft-supported operating systems, for example, XP and 2003. In situations where I have no options but to run older operating systems, I would like for it to be backwards compatible."
"The initial load is terribly slow and often has delays with the login page loading."
More Datto Remote Monitoring and Management Pricing and Cost Advice →
