We are using the service for DDoS protection, and all applications that are accessed over the internet need to be put behind the Radware WAF. Currently, we are using 60 to 65 licenses of Radware WAF where we have onboarded these internet-exposed applications. 

We are the largest data center company in Asia with almost six data centers in India, and we are planning to expand beyond India. We use Radware DDoS Protection Service for protecting our infrastructure and providing Cloud DDoS as a service to around 500 end customers who have hosted their infrastructure on our cloud co-location.

My use case is that whatever traffic is coming from the internet, all that traffic is being monitored. It is sent to their scrubbing center, and from there, anything non-genuine gets blocked as per IOC, and the genuine traffic is sent to my inside applications.

I currently use Radware DDoS to mitigate DDoS attacks, specifically highly volumetric DDoS attacks. There is an option to mitigate Layer 7 DDoS attacks to a good limit, though not fully. The better capability of this device is its machine learning capability, as it can create its own signatures on zero-day attacks.

Radware DDoS is effective at mitigating advanced DDoS threats such as burst and DNS attacks. This kind of attack is dealt with well when it comes to mitigations in Radware because the DDoS works efficiently in such scenarios.

Radware's protection ensures that legitimate, normal users are not affected during a DDoS attack because of the quota values. I set up these values based on the historic traffic I see, which is beneficial so that Radware DDoS will only be activated if the traffic is above that particular level. Another way is by using the security template, where I can allow genuine traffic based on the ports and protocols. I can create my own signatures in the security template to always allow them during a mitigation, and through these ways, I can achieve that.

We have been using Radware DDoS extensively for the past two years in our production network within the utility sector. Primarily, we use it for application layer filtering and for direct termination with our Internet Service Providers (ISPs). Initially, we encountered several challenges during the configuration process, primarily due to the lack of ready-made templates. However, over the last two years, we have successfully implemented filtering measures, effectively mitigating our DDoS attacks by removing unwanted traffic directed at our public IP addresses.

This system has been crucial in securing our operations and meeting our specific needs for our data center. All public domain URLs in the utility sector are hosted behind an Internet firewall, ensuring that the traffic directed to these public domains is properly managed through DDoS protection. That sums up our experience with this system.

We primarily use Radware DDoS Protection Service for ensuring network security and protecting against cyber threats. Our level two support engineers are hands-on with the service, utilizing it for network protection and incident visibility.

The main use case for Radware DDoS Protection Service is to protect our websites, mail server, and DNS servers published on the internet.

In terms of that protection, it has been performing very well; I have not noticed specific instances where it stood out.

We use the solution to detect all incoming and outgoing traffic to our environment and to determine if there are any anomalies or if it is attack-free.

We wanted a way to defend our network from all kinds of attacks, like UDP segmentation attacks, HTTPS requests, syn attacks, etc.

We are a data center company. We have our own cloud, and we need to protect this cloud from DDoS attacks. That is why we have subscribed to Cloud DDoS as well as on-premise DDoS from Radware.

Our web-based services were frequently overloaded by DDoS attacks, causing slow performance, and unavailability, and impacting both our clients and internal users. To address this, we implemented the Radware Cloud DDoS Protection Service to safeguard our internet-facing assets and prevent these attacks from disrupting our services.

We use Radware's Cloud DDoS Protection Service to safeguard Cloud Graph with Layer Seven protection.

To mitigate Layer Seven DDoS attacks on our servers, we implemented Radware Cloud DDoS Protection Service.

We are using DefensePro for protecting our network and infrastructure from DDoS attacks.

As the new Director of Information Security with prior experience using Radware's Cloud DDoS Protection Service effectively, I'm advocating for its swift implementation from a product and budgetary standpoint. Having witnessed its value in both high-volume government and financial sectors, I believe these robust DDoS and WAF protections are no longer optional but an absolute necessity for our organization's security posture.

One of our customers utilizes Radware DefensePro as their DDoS mitigation solution.

We are a data center and cloud service provider. We are providing this as a service model to our customers. We are taking services and selling them to our customers. We will continue to provide services in consultation with the Radware team.

Opting for a solution like Radware DefensePro is a strategic move for our telecom company, especially considering the critical nature of our subscriber self-care portal and the potential impact on the organization's image and the country as a whole. 

Radware DefensePro is renowned for its advanced DDoS mitigation capabilities and has significantly enhanced the security posture of our infrastructure.  

As a public sector unit, the stakes are high, and DefensePro's ability to handle sophisticated attacks provides an added layer of confidence. Its scalability ensures that our telecom infrastructure can adapt to changing traffic patterns and evolving threat landscapes.

Our company is an ISP. We provide DDoS protection services ourselves. We need the technical means to be able to provide such services. We have DefensePro in our facilities through which we provide protection services to our clients.

We are a mobile-based Internet banking organization in Southeast Asia. Our main product is actually, sending money from one place to another place through my application. So we need to be available over the Internet all the time. So if my application goes down, my business will go down. We use Radware DefensePro to protect our on-premises network hardware.

We use the product to protect our centers from DDoS attacks. We deploy the tool across multiple offices across the Middle and Far East. 

Our company provide services to government organizations, banks, and local police. Approximately two weeks ago, our customer experienced an attack with a volume of about 20 gigabits. Despite the attack, the website remained available and working perfectly.

We primarily use the solution for web application firewalls and as hardware.

We use Radware to control close to the most sensitive areas of our network and as protection against significant external attacks.

I'm a security engineer.

This solution is used to to block and mitigate cyber attacks. We have a lot of clients that use this solution including banks, corporates, and governments.

We used this product as part of our security solution. However, we do not plan to continue to use it.

The primary use of Radware DefensePro is to protect against DDoS attacks.

We utilize Radware Cloud DDoS Protection Service to safeguard against unpredictable floating IP traffic. If the traffic exceeds the capacity of the on-site Radware Defense Pro product, the system will automatically switch over to cloud-based filtering.

We use the solution for the protection of websites and institutional services. 

This is Radware's cloud-based protection solution. We have deployed this for our customers but the cloud is not very popular yet in the Philippines, most customers want to have it on their hardware. If a customer encounters volumetric data this cloud protection service comes into play so that traffic can be routed to the cloud for scanning and mitigation. 

I set this solution up for a company who was using it as their edge security solution. It was used to secure the entire infrastructure for the company and helped to protect against DDoS attacks. It was being used in conjunction with a load balancing solution and an open-source firewall running on CentOS.

I was working with them at the time that this solution was deployed, but I have now moved.

The solution is primarily used to protect our cockpit internet line which is serving our cockpit application.

We primarily use the solution for preventing distributed denial of service, or DDoS attacks.

We primarily use the solution for attack prevention.  

The solution is mainly used to protect our web services and mail. 

Our primary use case is to prevent DDos attacks. These block legitimate users from accessing a website. DDoS attacks send more requests than the victim server can handle.

We use Radware DefensePro as a part of a shock security operation center and for securing our network. For our servers, we use Radware DefensePro. 

I always recommend this for the banking and manufacturing sectors where we have to secure the networks. It is an anti-DDoS solution.

We have to secure our networks for all incoming traffic, denial of service attacks, and other types of intrusion. We have multiple attacks attempting to access our internal networks. 

We install Radware DefensePro as an internal application for external work, which will maintain our security so that the external attacker is unable to access our network services. 

To secure our networks from the external world for different types of attacks, we use Radware DefensePro as an anti-DDoS service, which is very effective.

It is used for DDoS protection, especially from low-rate DDoS attacks.

The product offers network protection from internet attacks. It continuously monitors network traffic. Upon identifying threats, it generates alerts and initiates analysis to mitigate the impact of the excessive traffic.