We performed a comparison between CA Application Delivery Analysis [EOL] and LinkRunner based on real PeerSpot user reviews.
Find out what your peers are saying about NetAlly, Auvik, Wireshark and others in Network Troubleshooting."The most valuable feature is the fault management monitoring."
"The pricing is relatively low compared to other solutions in this area. I'd go so far as to say it's even significantly less than the competition."
"In terms of documenting ad hoc additions and other changes to wired ethernet connections, this product is very good. It keeps the information in the cloud and I have the ability to name it. This makes it very nice and easy to see."
"I've found the VLAN test feature to be most valuable. That's because not many devices do VLAN tests. Normally, I have to send a center technician to check a line and see if it's alive. If it's working, then I have to send a network technician out to log into a switch and see which port it's on and on which VLAN that port is. That's two persons and two separate visits. This device does all of this in a matter of seconds, and that has saved me a lot of time, troubleshooting, and resources."
"AutoTest is very helpful. It's very streamlined and it's very easy to set up and very easy to identify what we want to achieve. It's probably the feature we use the most. It provides us with LLTD, which is very useful."
"I like the fact that I can tell the equipment to stop at a certain point during the test of a cable, to see whether or not there is basic connectivity. I can stop it before it starts pinging the outside world, such as Google or, perhaps, our core network switch. Those basic results—do I have a basic connection and power—finish up fast and I can move on."
"In terms of network validation, and copper and fiber Ethernet configuration, I can't imagine life without LinkRunner devices. The minute I got the 10G, everybody was fighting over it. They had never used such a device before and it was just breathtaking for them to very quickly see the validation you can gain from these devices."
"The auto-test feature is vital and does 90 percent of what I need on its own. It's fast and I can get there in just a few clicks. It does a good job and tells me everything I need to know. LinkRunner works pretty quickly and always seems to be accurate."
"LinkRunner 10G is very handy for onsite troubleshooting and implementations. We can quickly identify the links in terms of 1G, 2.5G, 5G, and 10G on the copper side, and also from 1G up to 10G on the fiber side. It is very handy for me because we deal with a lot of banks. Especially for the provisioning of new services, we use this tool to identify the link capacity and do the necessary testing to ensure all the circuits are ready before the handover to the next team to operate the technology. This is something that saves a lot of time as compared to the old days."
"It provides a way to test 10Gig connectivity. Previously, we had to hook up a switch. That was our only way. Now, with LinkRunner, we can test on the fly if an SFP is bad or if the switch has the right configuration on it."
"The user interface needs improvement."
"My biggest complaint about ADA is that you have to rely on dedicated appliances."
"It is very stable. That being said, there is one feature that is not quite as stable as the rest of the product. You can leave it plugged into a location where you're doing some work and connect to it remotely by a program called VNC... sometimes that function breaks down, if you've been running for a couple of days... if you're remotely controlling it, you're probably not right next to it. That can be modestly annoying."
"It doesn't turn off automatically, but the toning function goes to sleep. It seems to stop toning after five or six minutes if you don't find the cable. It could be up to ten minutes, but if you don't find the cable that you're trying to tone quick enough, you'll have to go back and restart the tone. So, it doesn't turn itself off, but while toning, it turns itself off."
"One area where LinkRunner could be improved is the battery life. Depending on which tests are run, it gets a decent six to eight hours. However, sometimes we need to do back-to-back shifts to meet a deadline, and we need access to an outlet to keep it plugged in and charging. It takes about an hour or two to charge."
"It's a little bit tough getting used to at first, but once you get the hang of it, and once you start using it more, like anything, it gets easier. The difficult part, at first, is knowing where to find each test and how to use the tests."
"I wish they had software that could create continuous streams of traffic. I'm not sure if that's possible with LinkRunner, but it would be very helpful in some of the test case scenarios that clients are looking for, in regards to quality of service"
"A feature that I would like to see is the ability to send a tone down the cable. That would be great. I have to use a separate tool for that. If I'm trying to troubleshoot a cable that is not plugged into a network switch, I need the ability to tone."
"It does take a little while to boot up if it's turned off."
"It runs tests quickly, but it takes a while to boot up. It's somewhat disappointing that LinkRunner takes some time to turn on. When I arrive in the space, I usually spend the first two minutes waiting."
More CA Application Delivery Analysis [EOL] Pricing and Cost Advice →
Earn 20 points
CA Application Delivery Analysis [EOL] doesn't meet the minimum requirements to be ranked in Network Troubleshooting while LinkRunner is ranked 1st in Network Troubleshooting with 20 reviews. CA Application Delivery Analysis [EOL] is rated 6.6, while LinkRunner is rated 8.6. The top reviewer of CA Application Delivery Analysis [EOL] writes "Impressive ability to show potential slow downs. ". On the other hand, the top reviewer of LinkRunner writes "Single Auto-Test button gives me all the information I need on most jobs". CA Application Delivery Analysis [EOL] is most compared with , whereas LinkRunner is most compared with NetAlly EtherScope nXG, LinkSprinter, AirCheck G3, OneTouch AT Network Assistant and IxChariot.
See our list of best Network Troubleshooting vendors.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.