We performed a comparison between AirCheck G3 and NetAlly EtherScope nXG based on real PeerSpot user reviews.
Find out in this report how the two Network Troubleshooting solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."AirCheck G2 gives me an overview of which channels are used by the access points or who delivers the Wi-Fi, which gives me a clear picture of what's going on."
"It has made our networking staff more productive. We spend less time because the device helps us by identifying the issue and providing a solution for the customer. Prior to not having this device, we would have to guess when an issue arose. Now, we don't have to guess. This can easily save us hours per call."
"The AirMapper Site Survey on the AirCheck G2 is the most valuable feature. It is really nice to be able to upload the maps remotely to the website, and then have the analyst upload the results so we can review the data."
"The ability to push data to Link-Live is really important. On the main screen, you can see all the system parameters, and then you can also go and see all the current systems that are operating. They all have different SSIDs or system identifiers, and you can see all SSIDs that are operating in a certain area. Being able to see that and being able to dive into each one and figure out what frequency it is operating under is valuable."
"It is a pretty rock-solid device that is well-built."
"It is portable. It is rugged. It comes with a nice case. It has been dropped, but it doesn't break. I don't have a crack screen or anything like that. It has pretty good battery life."
"I like the cloud functionality. That's very useful because somebody can go onsite, someone who is not really skilled, and I can see the test results from the office."
"The solution saves us a factor of 10 in time. If a typical WiFI ticket would cost me two hours with AirCheck, then it would cost me 20 hours without it. At 20 hours, you start to refuse to do tickets because it is just too expensive."
"The things that I find most valuable are the Wi-Fi app and the Discovery app. Those two things help a lot when I'm doing the initial discovery of a space. I also use the AutoTest feature quite a lot, especially if I'm troubleshooting."
"In terms of the solution's full line rate 10-gigabit capability, my other 10 Gb test equipment is much bigger, bulkier, and heavier. One of my ways of assessing the nXG was to compare it with what I knew to be tried and true on 10-gig to make sure that they matched, and they did. It very quickly got my trust. The fact that it can do 10 Gb, without dropping a packet from what I've seen so far — and we used it a lot in that first three months — tells a pretty good story."
"It clearly depicts the information we're looking for on a 10Gig testing, and we can also verify 100Gig links with it between our routing sites."
"It has reduced our internal troubleshooting time. In the cases where we could not internally solve the troubleshooting, we would have had to contact an external vendor to test cable, rerun it, etc. NetAlly EtherScope has let us eliminate that in most cases so we can resolve an issue on our own without having to call a third-party out to identify the problem. It has reduced our troubleshooting time for network cabling issues by a good 75 percent."
"I love the AutoTest feature... AutoTest allows us to find out what port it is on the switch and to trace it back to a particular patch panel. We can then document it, if necessary, or use that information for connecting a device or for re-VLANing a switch to the appropriate VLAN."
"Being able to do a Wi-Fi walk-around survey with a handheld tool is one of the most valuable features of NetAlly EtherScope nXG."
"My impression of the ease of use is that it definitely is easy to use both the handheld device and the app walking around."
"EtherScope has made our networking staff more productive. We have remote locations and can use the tools to collaborate. I have other people looking at it at the same time that I am looking at it. With the uploading ability, I can have more eyes on the project at the same time, instead of just one set of eyes."
"The only thing that would be an improvement would be the ability to do MPO/MPT testing, which is another mode of fiber, along with more options on the SFP to do that testing."
"We use .1x authentication, so I need to download the certificate onto the device. It would be nice to have this functionality through the cloud as well. Right now, you need to do it through the software by connecting your laptop physically to the AirCheck. This is one thing that is a bit slow."
"The solution doesn't have much functional information online."
"It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you could eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address."
"The biggest improvement would be an easier upload over wireless to Link-Live. Currently, the device has to be patched into the Ethernet. The wireless upload has been giving us some issues."
"I would like them to modify the interface. The button to change profiles is fairly small. When you have interventions, it is not always possible to have a ballpoint pen or perfect precision touch with it, since sometimes you need to touch it quite a lot when your hands are very dirty. I would like a special pen that is compatible with that responsive screen. That would make it easier."
"The battery life needs improvement. For example, when you are doing an Ethernet test, that seems to drain the battery pretty quickly."
"It was hard to determine which AP was which because it only shows the MAC address. It'll also display the MAC address of the BSSID, so it looked like I had 12 APs in my house. If I have three access points and each is a dual-band with an SSID or BSSID for each radio, it comes out to about 12 APs. That's one of the bugs fixed in the latest firmware update, but it's only available if you have a NetAlly support contract."
"NetAlly doesn't have a spectrum analyzer. I have to use other tools to view the spectrum, and this is a problem."
"On a hardware spec, it'd be nice to have something above 10-Gigs."
"The battery life could be better. There have been a couple of times that I used it and put it down, then I went to pick it up and the battery was dead. So, I need to take the power cord with me in order to continue using it."
"If I could reset it remotely, meaning reboot the unit, that would be helpful. One time, the test would not respond; the script would lock up. I had to go and manually reboot it. If I could have sent a command to reboot and it would have automatically connected to the wireless, that would have made it perfect. That was the only thing that it did not do."
"There are some inconsistencies in how it uploads the test results to the cloud, but it might just need a minor improvement on the software side. When you don't have an internet connection on the EtherScope when you do the testing, it saves the results into memory. When it has an internet connection, it uploads those results, but it doesn't work all the time. Sometimes, you need to manually push it."
"We have had to use a battery pack unit, bringing it with us, when we are doing long testing or a lot of testing. It is like a mini computer, so it does use a lot of battery life."
"The user interface could be a little bit more streamlined, a little bit easier. Sometimes it's hard to find a specific thing that you're looking for. In terms of hardware-based improvement, the battery would be the biggest issue. The battery goes out very quickly."
"I would love to see port profiles. This is something I've expressed to them. The ability for a technician to plug it into a switch port, and say, "Okay, this port will be an access point or this port will be a phone and desktop PC," thus choosing a profile. It will then push a configuration to the device it's connected to and verify that the switch port is correctly configured, so I can hand this to a phone tech who doesn't have any access to a network switch to be able to make changes. They can go out and plug this into a port, then they are able to push a profile to the switch port through the device. That would be pretty fantastic as a next step for this device."
Intuitive user interface provides actionable intelligence, speeding and simplifying wireless deployment, troubleshooting and validation.
Multi-technology, all-in-one handheld network analyzer that enables engineers and technicians to get more done faster, from deployment to maintenance and documentation of their ever-changing Wi-Fi, Bluetooth/BLE, and Ethernet access networks.
AirCheck G3 is ranked 5th in Network Troubleshooting with 13 reviews while NetAlly EtherScope nXG is ranked 2nd in Network Troubleshooting with 22 reviews. AirCheck G3 is rated 8.6, while NetAlly EtherScope nXG is rated 8.8. The top reviewer of AirCheck G3 writes "A portable, rugged device that reduces resolution time and saves thousands of dollars". On the other hand, the top reviewer of NetAlly EtherScope nXG writes "Handheld form factor, intuitive interface that is easy to use, helps us quickly troubleshoot network problems". AirCheck G3 is most compared with LinkRunner, AirMagnet Survey and iTrinegy NE-ONE Network Emulator, whereas NetAlly EtherScope nXG is most compared with LinkRunner, LinkSprinter and AirMagnet Survey. See our AirCheck G3 vs. NetAlly EtherScope nXG report.
See our list of best Network Troubleshooting vendors.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.