We performed a comparison between AirCheck G3 and OptiView XG [EOL] based on real PeerSpot user reviews.
Find out what your peers are saying about NetAlly, Wireshark, Auvik and others in Network Troubleshooting."AirCheck has a feature that lets you play a tone so you can track down a rogue AP based on the RF signal. That's a cool feature. It can also help you identify interference like microwave ovens or Bluetooth devices. I also like the ability to link it to your online account. It sends a report via email and saves it on the cloud."
"It is a pretty rock-solid device that is well-built."
"I like the cloud functionality. That's very useful because somebody can go onsite, someone who is not really skilled, and I can see the test results from the office."
"The solution saves us a factor of 10 in time. If a typical WiFI ticket would cost me two hours with AirCheck, then it would cost me 20 hours without it. At 20 hours, you start to refuse to do tickets because it is just too expensive."
"The auto-test, channel scanner, packet capture, and Link-Live integration are all crucial features we use regularly. The wired cable tester is also indispensable. We frequently run into problems during cable testing that are hard to pin down. When tracking down a cable problem, you usually need to plug something into the cable and ensure the cable plant is reliable."
"AirCheck G2 gives me an overview of which channels are used by the access points or who delivers the Wi-Fi, which gives me a clear picture of what's going on."
"It is portable. It is rugged. It comes with a nice case. It has been dropped, but it doesn't break. I don't have a crack screen or anything like that. It has pretty good battery life."
"The airCheck is the real-time spectrum analyzer to see clients that could be connecting to our network, not just rogue networks out there, but rogue clients and other interference in that particular spectrum."
"It is a very valuable tool. It goes out and does a discovery, which is a great process of it. You could have something like a rogue DHCP server, and it will identify it, and then you can see to which switch port it is connected. It is quite an impressive tool. I really liked it because you didn't have to install an agent on anything. It would just go out and do its discovery. For me, that's great."
"Gives us the ability to see our network."
"I would like them to modify the interface. The button to change profiles is fairly small. When you have interventions, it is not always possible to have a ballpoint pen or perfect precision touch with it, since sometimes you need to touch it quite a lot when your hands are very dirty. I would like a special pen that is compatible with that responsive screen. That would make it easier."
"We use these out in the field, and because they're not allowed on our network, we usually have to have the person take them home and provide backhaul to them. In other words, they are not allowed through our firewalls to dump the data. So, we have to have them go to a separate wired network to dump the data. There could be an option to put an LTE and have a phone engine in it so that you can buy a SIM card for it and have it use cellular to download the data. That is something that would be nice to have. That's a little kink in this system right now. Other than using the Ethernet port to download data, it'd be nice if we could use either LTE or some other way to get the data that was collected by AirCheck G2 to our Link-Live portal."
"The biggest improvement would be an easier upload over wireless to Link-Live. Currently, the device has to be patched into the Ethernet. The wireless upload has been giving us some issues."
"A feature I would like to see is the ability to charge the device via a PoE outlet. Usually, I need to charge it at home. It would be good to leave the device plugged in and charging at a PoE source at the customer site after a quick look at the network when I have moved on to other tasks."
"We use .1x authentication, so I need to download the certificate onto the device. It would be nice to have this functionality through the cloud as well. Right now, you need to do it through the software by connecting your laptop physically to the AirCheck. This is one thing that is a bit slow."
"The only thing that would be an improvement would be the ability to do MPO/MPT testing, which is another mode of fiber, along with more options on the SFP to do that testing."
"It was hard to determine which AP was which because it only shows the MAC address. It'll also display the MAC address of the BSSID, so it looked like I had 12 APs in my house. If I have three access points and each is a dual-band with an SSID or BSSID for each radio, it comes out to about 12 APs. That's one of the bugs fixed in the latest firmware update, but it's only available if you have a NetAlly support contract."
"It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you could eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address."
"I would like a built-in tap feature which doesn't interfere with the network, and it allows you to see what is happening there."
"Its price can be improved. Their support can also be improved a little bit. In terms of features, it did everything I wanted it to do. With more features, I would have to start installing network agents or something else, and I don't want to have to install anything. This was the value for me about this device."
Earn 20 points
AirCheck G3 is ranked 5th in Network Troubleshooting with 13 reviews while OptiView XG [EOL] doesn't meet the minimum requirements to be ranked in Network Troubleshooting. AirCheck G3 is rated 8.6, while OptiView XG [EOL] is rated 8.6. The top reviewer of AirCheck G3 writes "A portable, rugged device that reduces resolution time and saves thousands of dollars". On the other hand, the top reviewer of OptiView XG [EOL] writes "A valuable, impressive, and portable product that saves time and has great scalability and stability". AirCheck G3 is most compared with LinkRunner, AirMagnet Survey, iTrinegy NE-ONE Network Emulator and NetAlly EtherScope nXG, whereas OptiView XG [EOL] is most compared with .
See our list of best Network Troubleshooting vendors.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.