We performed a comparison between AirCheck G3 and NetAlly EtherScope nXG based on real PeerSpot user reviews.
Find out in this report how the two Network Troubleshooting solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."It is a pretty rock-solid device that is well-built."
"The AirMapper Site Survey on the AirCheck G2 is the most valuable feature. It is really nice to be able to upload the maps remotely to the website, and then have the analyst upload the results so we can review the data."
"The airCheck is the real-time spectrum analyzer to see clients that could be connecting to our network, not just rogue networks out there, but rogue clients and other interference in that particular spectrum."
"AirCheck G2 gives me an overview of which channels are used by the access points or who delivers the Wi-Fi, which gives me a clear picture of what's going on."
"It has made our networking staff more productive. We spend less time because the device helps us by identifying the issue and providing a solution for the customer. Prior to not having this device, we would have to guess when an issue arose. Now, we don't have to guess. This can easily save us hours per call."
"The information provided by the solution for resolving connectivity and performance problems is very thorough. The reporting functionality is extremely good as I can pass that information on with little input. The device will identify issues and problems, e.g., the diagnostic material. When you have Internet access, it sends the information to your email address, which is very useful."
"The auto-test, channel scanner, packet capture, and Link-Live integration are all crucial features we use regularly. The wired cable tester is also indispensable. We frequently run into problems during cable testing that are hard to pin down. When tracking down a cable problem, you usually need to plug something into the cable and ensure the cable plant is reliable."
"The solution saves us a factor of 10 in time. If a typical WiFI ticket would cost me two hours with AirCheck, then it would cost me 20 hours without it. At 20 hours, you start to refuse to do tickets because it is just too expensive."
"It has reduced our internal troubleshooting time. In the cases where we could not internally solve the troubleshooting, we would have had to contact an external vendor to test cable, rerun it, etc. NetAlly EtherScope has let us eliminate that in most cases so we can resolve an issue on our own without having to call a third-party out to identify the problem. It has reduced our troubleshooting time for network cabling issues by a good 75 percent."
"It cuts the time down in half. You don't need to get a laptop out and do different testing. We can just grab this one tool, bring it, and do all our network testing, surveying, and reviews to figure out what the problems are with just one device, instead of having to use multiple people and devices to do that. You cut down time by 50% because you won't normally need multiple people onsite. A lot of times, you can do everything with one person and one tool."
"I love the AutoTest feature... AutoTest allows us to find out what port it is on the switch and to trace it back to a particular patch panel. We can then document it, if necessary, or use that information for connecting a device or for re-VLANing a switch to the appropriate VLAN."
"The solution’s AirMapper Site Survey app is extremely easy to use. We give it to the technicians and send them out to go do that function. We hand it to the technician who goes onsite, then they take a photo of the overall area of a floor plan and are able to go do that site survey without almost any instruction from any engineer. So, it is very usable for beginner-type techs."
"In terms of the solution's full line rate 10-gigabit capability, my other 10 Gb test equipment is much bigger, bulkier, and heavier. One of my ways of assessing the nXG was to compare it with what I knew to be tried and true on 10-gig to make sure that they matched, and they did. It very quickly got my trust. The fact that it can do 10 Gb, without dropping a packet from what I've seen so far — and we used it a lot in that first three months — tells a pretty good story."
"When it comes to that remote troubleshooting perspective of being able to survey an area to see if there are problems, make adjustments, and then have that same individual resurvey that same area, I don't have to send people to a week long class on how to use the device. I know I am getting consistent results, which can verify near real-time, and whether or not the changes that I have implemented solve the problem."
"The most valuable part is absolutely being able to assess existing WiFi networks quickly. You get very powerful details of networks, details that you couldn't see unless you had multiple pieces of software and hardware. This does it all in one thing."
"The whole product is valuable because it's really a bunch of features that make up the one testing utility. Between auto tests, wireless assessments, its ability to do iPerf speed and traffic testing, as well as packet captures — all of those really contribute to a very successful product and allow me to do my job in a better manner."
"The biggest improvement would be an easier upload over wireless to Link-Live. Currently, the device has to be patched into the Ethernet. The wireless upload has been giving us some issues."
"The solution doesn't have much functional information online."
"The only thing that would be an improvement would be the ability to do MPO/MPT testing, which is another mode of fiber, along with more options on the SFP to do that testing."
"I would love to have a button that pretends that you're an iPhone 5 or an Android Samsung, then tell me what you think the experience is. This is a very difficult thing to do because each of these things has different radios in them and behaves differently. Now, I can go into the user's office, and say, "The tool says everything's green. The WiFI infrastructure is fine, but their iPhone experience sucks." Is it a problem with their particular iPhone or is it a problem with any iPhone model? If I could have this solution emulate an iPhone model so I can walk into that room, and say, "My tools pretending to be your iPhone and it works fine. It must be your particular iPhone that we have a problem with." I found mobile phones in general have lousy radios and the coverage isn't strong enough, but it would be a nice feature."
"It was hard to determine which AP was which because it only shows the MAC address. It'll also display the MAC address of the BSSID, so it looked like I had 12 APs in my house. If I have three access points and each is a dual-band with an SSID or BSSID for each radio, it comes out to about 12 APs. That's one of the bugs fixed in the latest firmware update, but it's only available if you have a NetAlly support contract."
"It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you could eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address."
"The battery life needs improvement. For example, when you are doing an Ethernet test, that seems to drain the battery pretty quickly."
"We use these out in the field, and because they're not allowed on our network, we usually have to have the person take them home and provide backhaul to them. In other words, they are not allowed through our firewalls to dump the data. So, we have to have them go to a separate wired network to dump the data. There could be an option to put an LTE and have a phone engine in it so that you can buy a SIM card for it and have it use cellular to download the data. That is something that would be nice to have. That's a little kink in this system right now. Other than using the Ethernet port to download data, it'd be nice if we could use either LTE or some other way to get the data that was collected by AirCheck G2 to our Link-Live portal."
"The battery life could be better. There have been a couple of times that I used it and put it down, then I went to pick it up and the battery was dead. So, I need to take the power cord with me in order to continue using it."
"There are some inconsistencies in how it uploads the test results to the cloud, but it might just need a minor improvement on the software side. When you don't have an internet connection on the EtherScope when you do the testing, it saves the results into memory. When it has an internet connection, it uploads those results, but it doesn't work all the time. Sometimes, you need to manually push it."
"The user interface could be a little bit more streamlined, a little bit easier. Sometimes it's hard to find a specific thing that you're looking for. In terms of hardware-based improvement, the battery would be the biggest issue. The battery goes out very quickly."
"The small screen is a little bit of a handicap. It would be nice if we could, for instance, connect a larger screen to the device, but it's very user-friendly. You're only limited by the size of the screen. That's the only negative aspect of doing surveys with this device."
"One point of contention might be that when we were starting it up for the first time, there was a little bit of confusion about registration and getting the proper support plans applied. So, that could be more streamlined, but that's not uncommon in the industry."
"The only issue that I have ever had is the battery life. It does drain a little bit quickly... While it's true that by the time I'm finished with my assessment it's usually dead, I have usually finished what I need to do and everything has been pushed to Link-Live. But occasionally, I might need a backup battery if I need to do something for multiple hours."
"I would love to see port profiles. This is something I've expressed to them. The ability for a technician to plug it into a switch port, and say, "Okay, this port will be an access point or this port will be a phone and desktop PC," thus choosing a profile. It will then push a configuration to the device it's connected to and verify that the switch port is correctly configured, so I can hand this to a phone tech who doesn't have any access to a network switch to be able to make changes. They can go out and plug this into a port, then they are able to push a profile to the switch port through the device. That would be pretty fantastic as a next step for this device."
"The one thing that it doesn't do well, when it's doing airtime utilization measurements, is that it will classify things as non-802.11, and that isn't correct. What it could do better is make sure that it classifies all traffic that's in the air correctly."
AirCheck G3 is ranked 5th in Network Troubleshooting with 13 reviews while NetAlly EtherScope nXG is ranked 2nd in Network Troubleshooting with 22 reviews. AirCheck G3 is rated 8.6, while NetAlly EtherScope nXG is rated 9.0. The top reviewer of AirCheck G3 writes "A portable, rugged device that reduces resolution time and saves thousands of dollars". On the other hand, the top reviewer of NetAlly EtherScope nXG writes "Handheld form factor, intuitive interface that is easy to use, helps us quickly troubleshoot network problems". AirCheck G3 is most compared with AirMagnet Survey, LinkRunner and iTrinegy NE-ONE Network Emulator, whereas NetAlly EtherScope nXG is most compared with LinkRunner, LinkSprinter and AirMagnet Survey. See our AirCheck G3 vs. NetAlly EtherScope nXG report.
See our list of best Network Troubleshooting vendors.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.