We performed a comparison between AirCheck G3 and Auvik Network Management (ANM) based on real PeerSpot user reviews.
Find out in this report how the two Network Troubleshooting solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."I also like the remote session and the ability to log in to the device remotely. You can log in to the tester with your computer and can see the screen and operate the tester remotely. This is a very cool function, but it's very advanced."
"AirCheck G2 gives me an overview of which channels are used by the access points or who delivers the Wi-Fi, which gives me a clear picture of what's going on."
"The solution saves us a factor of 10 in time. If a typical WiFI ticket would cost me two hours with AirCheck, then it would cost me 20 hours without it. At 20 hours, you start to refuse to do tickets because it is just too expensive."
"It is portable. It is rugged. It comes with a nice case. It has been dropped, but it doesn't break. I don't have a crack screen or anything like that. It has pretty good battery life."
"The auto-test, channel scanner, packet capture, and Link-Live integration are all crucial features we use regularly. The wired cable tester is also indispensable. We frequently run into problems during cable testing that are hard to pin down. When tracking down a cable problem, you usually need to plug something into the cable and ensure the cable plant is reliable."
"It is a pretty rock-solid device that is well-built."
"AirCheck has a feature that lets you play a tone so you can track down a rogue AP based on the RF signal. That's a cool feature. It can also help you identify interference like microwave ovens or Bluetooth devices. I also like the ability to link it to your online account. It sends a report via email and saves it on the cloud."
"I like the cloud functionality. That's very useful because somebody can go onsite, someone who is not really skilled, and I can see the test results from the office."
"Being able to see things like the hardware lifecycle, if our equipment is up to date, if connections are broken, or whether there are physical line breaks, is helpful. We're able to determine connectivity issues. We can monitor pretty much anything that is network-related."
"It does provide very useful metrics, and it has improved a large portion of our day-to-day operations."
"I've found the topology mesh graph helpful, and I like the other features that factor into my work with Kubernetes."
"The traffic insights and the configuration management are the most valuable features."
"Auvik has decreased our mean time to resolution. It's easier to find the devices on the network and pull out the information. Of course, the SNMP is also good to get the logs. It helps in the network debugging or if we have to find any problems."
"Automated configuration backups and automated network diagrams are the most valuable."
"The topography and historical data are excellent; the latter essentially allows us to see back in time, which is helpful as users don't always report issues promptly. The ability to go back and look at historical data is a good feature."
"Auvik's features for monitoring device availability and bandwidth utilization have greatly helped us. From a cybersecurity perspective, bandwidth utilization tells us if we have a potential data exfiltration incident. It also helps us decide whether to increase the bandwidth for one of the links or if the current bandwidth is sufficient."
"The only thing that would be an improvement would be the ability to do MPO/MPT testing, which is another mode of fiber, along with more options on the SFP to do that testing."
"We use these out in the field, and because they're not allowed on our network, we usually have to have the person take them home and provide backhaul to them. In other words, they are not allowed through our firewalls to dump the data. So, we have to have them go to a separate wired network to dump the data. There could be an option to put an LTE and have a phone engine in it so that you can buy a SIM card for it and have it use cellular to download the data. That is something that would be nice to have. That's a little kink in this system right now. Other than using the Ethernet port to download data, it'd be nice if we could use either LTE or some other way to get the data that was collected by AirCheck G2 to our Link-Live portal."
"It was hard to determine which AP was which because it only shows the MAC address. It'll also display the MAC address of the BSSID, so it looked like I had 12 APs in my house. If I have three access points and each is a dual-band with an SSID or BSSID for each radio, it comes out to about 12 APs. That's one of the bugs fixed in the latest firmware update, but it's only available if you have a NetAlly support contract."
"It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you could eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address."
"I would love to have a button that pretends that you're an iPhone 5 or an Android Samsung, then tell me what you think the experience is. This is a very difficult thing to do because each of these things has different radios in them and behaves differently. Now, I can go into the user's office, and say, "The tool says everything's green. The WiFI infrastructure is fine, but their iPhone experience sucks." Is it a problem with their particular iPhone or is it a problem with any iPhone model? If I could have this solution emulate an iPhone model so I can walk into that room, and say, "My tools pretending to be your iPhone and it works fine. It must be your particular iPhone that we have a problem with." I found mobile phones in general have lousy radios and the coverage isn't strong enough, but it would be a nice feature."
"NetAlly has been behind the curve on visualization, Wi-Fi design, and heat maps for a little while now. They're perfectly aware of this deficiency, but what they offer is good enough for a lot of people. It's not suitable for larger shops, but it works in a pinch. The AirMapper and subsequent AirMagnet integration is an afterthought."
"The solution doesn't have much functional information online."
"We use .1x authentication, so I need to download the certificate onto the device. It would be nice to have this functionality through the cloud as well. Right now, you need to do it through the software by connecting your laptop physically to the AirCheck. This is one thing that is a bit slow."
"Auvik's notifications could be better."
"Auvik could be better integrated with our ticketing system ConnectWise Manage. We tried integrating Auvik to create tickets, but working to implement a more granular classification system based on priority. The important thing is that we get the alerts, regardless of priority, but that's something that can be improved."
"I would like a Power BI-style dashboard that you could show to a non-technical person with metrics like the number of devices accessing wireless, the amount of internet, total issues resolved each month, etc."
"Auvik could be more customizable. Also, the network map isn't as clear as it could be. I don't know if it's even possible, but it would be nice if Auvik could pick up on dumb switches. I don't know if that's possible based on SNMP, but if they can figure out a way to do that, it would make our life much easier."
"Something else I would like to see would be additional vendors for the hardware life cycle. Right now, they mainly focus on Cisco stuff, which is fine, but not every customer we have uses Cisco."
"I've been finding some features difficult. It might be because I'm used to PRTG, and Auvik works differently. When it comes to monitoring a simple IP address, Auvik makes it a bit harder and more complex because you have to create a service inside the site. It's not just creating a sensor and having it ping the device. You need to go to the site and create the service."
"A feature I'd like to see is a stat breakdown of our networks at the end of every month, showing package drop rates for each network and so on. For example, this data delivered in an email would be a good feature."
"A room for improvement would be integration with our help desk system."
More Auvik Network Management (ANM) Pricing and Cost Advice →
AirCheck G3 is ranked 5th in Network Troubleshooting with 13 reviews while Auvik Network Management (ANM) is ranked 4th in Network Troubleshooting with 131 reviews. AirCheck G3 is rated 8.6, while Auvik Network Management (ANM) is rated 8.8. The top reviewer of AirCheck G3 writes "A portable, rugged device that reduces resolution time and saves thousands of dollars". On the other hand, the top reviewer of Auvik Network Management (ANM) writes "Enables us to get on top of issues before they become an outage". AirCheck G3 is most compared with LinkRunner, AirMagnet Survey, iTrinegy NE-ONE Network Emulator and NetAlly EtherScope nXG, whereas Auvik Network Management (ANM) is most compared with PRTG Network Monitor, LogicMonitor, Meraki Dashboard, SolarWinds NPM and Domotz. See our AirCheck G3 vs. Auvik Network Management (ANM) report.
See our list of best Network Troubleshooting vendors.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.